Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login
    1. Home
    2. Dumbo
    • Profile
    • Following 0
    • Followers 0
    • Topics 5
    • Posts 23
    • Best 1
    • Controversial 0
    • Groups 0

    Dumbo

    @Dumbo

    1
    Reputation
    6
    Profile views
    23
    Posts
    0
    Followers
    0
    Following
    Joined Last Online

    Dumbo Unfollow Follow

    Best posts made by Dumbo

    • Ender 3 Pro with Duet 2 Maestro

      Got my new board wired in and trying to configure the RepRapFirmware. Has anyone got a base line config for this machine to get me going, cheers.

      posted in Tuning and tweaking
      Dumboundefined
      Dumbo

    Latest posts made by Dumbo

    • RE: Cura settings

      Thanks for the help I have changed a few things on you setup but getting there. Thank you very much

      posted in Duet Hardware and wiring
      Dumboundefined
      Dumbo
    • RE: Cura settings

      cura settings
      M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration
      M203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate
      M204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration
      M205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk
      M220 S100 ;Reset Feedrate
      M221 S100 ;Reset Flowrate

      G28 ;Home

      G92 E0 ;Reset Extruder
      G1 Z2.0 F3000 ;Move Z Axis up
      G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position
      G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line
      G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little
      G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line
      G92 E0 ;Reset Extruder
      G1 Z2.0 F3000 ;Move Z Axis up

      Duet Settings for z
      ; homez.g
      ; called to home the Z axis
      ;
      ; generated by RepRapFirmware Configuration Tool v2 on Mon May 06 2019 00:09:50 GMT-0600 (Central Standard Time)
      G91 ; relative positioning
      G1 Z5 F6000 S2 ; lift Z relative to current position
      G1 X50 Y50 ; Move over for Z probe referance
      G1 S1 Z-265 F1800 ; move Z down until the endstop is triggered
      G92 Z0 ; set Z position to axis minimum (you may want to adjust this)

      ; Uncomment the following lines to lift Z after probing
      G91 ; relative positioning
      G1 S2 Z5 F100 ; lift Z relative to current position
      G90 ; absolute positioning
      G1 X0 Y0 F6000

      Thanks

      posted in Duet Hardware and wiring
      Dumboundefined
      Dumbo
    • RE: Cura settings

      What are your setting if I can ask. Did you delete your homing files in the Duet confi folder?

      posted in Duet Hardware and wiring
      Dumboundefined
      Dumbo
    • Cura settings

      I have my ender 3 setup with a new computer and am using Cura as my slicer. I have configured the printer and the Duet wifi to home in z with a ir probe. The problem is that when I slice and send the Gcode to Duet from Cura it will not pick up my homing settings that are on the duet and moves slow to the homing points,but worse it will not move the x or y over to allow the z prob to be over the bed plate so it crashes into it. How do i tell it to do the same in Cura as it does in Duet. If that makes any sense.

      posted in Duet Hardware and wiring
      Dumboundefined
      Dumbo
    • RE: Can not get past 183 deg on hot end

      @paulhew said in Can not get past 183 deg on hot end:

      ; Heaters
      M305 P0 T98801 B4185 R2200 ; Set thermistor + ADC parameters for heater 0
      M307 H0 A205.5 C822.3 D1.2 V24.1 B0 ; Bed PID
      M143 H0 S100 ; Set temperature limit for heater 0 to 100C
      M305 P1 T100000 B4725 C7.060000e-8 R2200 ; E3D - Set thermistor + ADC parameters for heater 1
      M307 H1 A551.6 C246.4 D3.5 V24.2 B0 ; PID Autotune
      M143 H1 S285 ; Set temperature limit for heater 1 to 280C

      thanks I will have a look

      posted in Duet Hardware and wiring
      Dumboundefined
      Dumbo
    • RE: Can not get past 183 deg on hot end

      tried that and it errors out at same point

      posted in Duet Hardware and wiring
      Dumboundefined
      Dumbo
    • Can not get past 183 deg on hot end

      Hi,
      I have a E3D 24 v heater cartridge and can not get past 183 deg,s. I am stumped. here is my config.

      ; Configuration file for Duet WiFi (firmware version 1.21)
      ; executed by the firmware on start-up
      ;
      ; generated by RepRapFirmware Configuration Tool v2 on Sat Jun 08 2019 16:16:50 GMT+0100 (British Summer Time)

      ; General preferences
      G90 ; Send absolute coordinates...
      M83 ; ...but relative extruder moves

      ; Network
      M550 P"DAVES ENDER3" ; Set machine name
      M552 S1 ; Enable network
      M587 S"192.168.1.59" P"" ; Configure access point. You can delete this line once connected
      M586 P0 S1 ; Enable HTTP
      M586 P1 S1 ; Enable FTP
      M586 P2 S1 ; Enable Telnet

      ; Drives
      M569 P0 S0 ; Physical drive 0 goes backwards
      M569 P1 S0 ; Physical drive 1 goes backwards
      M569 P2 S1 ; Physical drive 2 goes forwards
      M569 P3 S1 ; Physical drive 3 goes forwards
      M350 X16 Y16 Z16 E16 I1 ; Configure microstepping with interpolation
      M92 X80.00 Y80.00 Z400.00 E93.00 ; Set steps per mm
      M566 X1200.00 Y1200.00 Z24.00 E300.00 ; Set maximum instantaneous speed changes (mm/min)
      M203 X30000.00 Y30000.00 Z300.00 E1500.00 ; Set maximum speeds (mm/min)
      M201 X500.00 Y500.00 Z100.00 E5000.00 ; Set accelerations (mm/s^2)
      M906 X400.00 Y400.00 Z400.00 E800.00 I30 ; Set motor currents (mA) and motor idle factor in per cent
      M84 S300 ; Set idle timeout

      ; Axis Limits
      M208 X-5.5 Y-10 Z0 S1 ; Set axis minima
      M208 X258.5 Y246 Z260 S0 ; Set axis maxima

      ; Endstops
      M574 X1 Y1 S3 ; Set endstops controlled by motor load detection

      ; Z-Probe
      M574 Z1 S2 ; Set endstops controlled by probe
      M558 P5 R0.4 H2.5 F1200 T6000 ; Set Z probe type to effector and the dive height + speeds
      G31 P25 X-31 Y0 Z0.6 ; Set Z probe trigger value, offset and trigger height
      M557 X20:215 Y20:215 S20 ; Define mesh grid

      ; Heaters
      M305 P0 T100000 B4138 R4700 ; Set thermistor + ADC parameters for heater 0
      M143 H0 S120 ; Set temperature limit for heater 0 to 120C
      M305 P1 T100000 B4138 R4700 ; Set thermistor + ADC parameters for heater 1
      M143 H1 S320 ; Set temperature limit for heater 1 to 320C

      ; Fans
      M106 P0 S0 I0 F500 H-1 ; Set fan 0 value, PWM signal inversion and frequency. Thermostatic control is turned off
      M106 P1 S1 I0 F500 H0 T45 ; Set fan 1 value, PWM signal inversion and frequency. Thermostatic control is turned on
      M106 P2 S1 I0 F500 H0:1 T45 ; Set fan 2 value, PWM signal inversion and frequency. Thermostatic control is turned on

      ; Tools
      M563 P0 D0 H1 ; Define tool 0
      G10 P0 X0 Y0 Z0 ; Set tool 0 axis offsets
      G10 P0 R0 S0 ; Set initial tool 0 active and standby temperatures to 0C

      ; Automatic power saving
      M911 S10 R11 P"M913 X0 Y0 G91 M83 G1 Z3 E-5 F1000" ; Set voltage thresholds and actions to run on power loss

      ; Custom settings are not configured
      it errors out with a took to long to get to temp after it hit 183. I asked it to go to 200. Any help please.

      posted in Duet Hardware and wiring
      Dumboundefined
      Dumbo
    • RE: Z probing in the wrong direction with inductive probe.

      Solved my issue with bed leveling . Getting the hang of the G-codes. Just a few more questions if anyone is watching and can answer. After doing a bed level with G29 (no options) does it use the same map every time. and it seems to scrap the nozzel along the bed when goin to the start point for the print, is this in the bed .g file settings which I seem to have deleted ☹ so I would also like a starting point for rewriting the script if it is involved in my issue. Also I have calibrated the probe with the nozzel touching the bed and sent a G92 Z0 to the board and then G30 S-1 to probe the bed without resetting the Z=0 position and entered the z figure in the offset in the config file for the probe but it it still seems to low and I have to do baby steps to move it up !!. Learning and it is great fun. Thanks for the help guys/gals

      posted in Tuning and tweaking
      Dumboundefined
      Dumbo
    • RE: Z probing in the wrong direction with inductive probe.

      Yes that is set correctly

      posted in Tuning and tweaking
      Dumboundefined
      Dumbo
    • RE: Z probing in the wrong direction with inductive probe.

      Silly question were do I set bed size?

      posted in Tuning and tweaking
      Dumboundefined
      Dumbo