@dc42 so you plan to also upgrade duet maestro with TMC2209 and provide sensorless homing? I believe there should be and hardware change to the pcb, as the DIAG pin of the driver is not connected to the MCU.

Hi,

I don't have any experience with duet controllers, but they look pretty promising from hardware point of view for my need. But I have a question about the software part:

Would it be possible to continuously control a filament extruder with let's say duet 3 6HC board? I need to control 4 stepper motors, 3 hearing elements and read back the temperature and read a filament diameter sensor with let's say SPI interface. Would it be possible to do it with the stock firmware and configuration or I would need custom firmware?

Thank you!

@T3P3Tony great news I would also want to participate into the testing

@dc42 is there any time estimation when the boards will be available for purchase?

Please add and wifi support! It would be very much appreciated!

@dc42 so you plan to also upgrade duet maestro with TMC2209 and provide sensorless homing? I believe there should be and hardware change to the pcb, as the DIAG pin of the driver is not connected to the MCU.