Best posts made by georgepaul

Wow @t3p3tony... this was really useful. I made the following changes in the config and it worked... Duet surprises me every day... It has solved my problem for now

M92 X640.00 Y640.00 Z3200.00 E200:200:200:200:200 ; Set steps per mm

; Tools
M563 P0 D0:1:2:3:4 H1 ; Define tool 0
G10 P0 X0 Y0 Z0 ; Set tool 0 axis offsets
G10 P0 R0 S0 ; Set initial tool 0 active and standby temperatures to 0C

The Gcode that I tried is;
G1 E10:100 :200:300:400
and the motors (E0, E1, E2, E3, E4)danced along.
I tried 5 extruder motors just out of curiosity