@Phaedrux Yes sorry, I don't do this message boards well. It was stabler. Got what I needed to install My SMuFF filament changer. So far only failure point is the Filament cutter. The SMuFF works perfectly. Scripts work without Crashing or giving me error codes not relating to my scripts. I am working on a Filament cutter using two blades from a Wire feed cutter. Had to poll my Direct drive from the Hotend to make room for the cutter. Bummer. But hot end is liter. Futcher add On's to the printer and 8-10 inch screen to the SBC in place of PanelDuo, posable bring back my direct drive extruder.
Note - This is not a Production Printer, just my retirement hobby