@Stephenbright The white wire in your photo looks broken to me. and I would question the rest of them in the same connector .

@Stephenbright The white wire in your photo looks broken to me. and I would question the rest of them in the same connector .

I hav one roll of petg. I won't name the brand because one roll might just be a bad roll. But it seems like it has a TG that is lower than most PLA. It has looked like heat creep twice only when printing it really slow . But what makes me think it is just bad filament is trying to remove my purge line from the heat bed after it cooled to 65c the 2in. Purge line stretched and was over 10in long after removing it..