@dc42 Thanks for the followup in a few days i will test it
Good Work

@dc42 thanks for the response ... i will ignore the indication

i got this error but printer continues to print

Firmware Name: RepRapFirmware for Duet 2 WiFi/Ethernet
Firmware Electronics: Duet WiFi 1.02 or later
Firmware Version: 2.02RC1(RTOS) (2018-08-31b4)
WiFi Server Version: 1.21
Web Interface Version: 1.22.3

0_1536240582136_console.txt

just a example

13:57:22: : Error: motor phase A disconnected on drivers 2
13:57:17: : Error: motor phase B disconnected on drivers 2
13:57:13: : Error: motor phase A disconnected on drivers 2
13:57:08: : Error: motor phase B disconnected on drivers 2
13:57:04: : Error: motor phase A disconnected on drivers 2
13:56:59: : Error: motor phase B disconnected on drivers 2
13:56:55: : Error: motor phase A disconnected on drivers 2
13:56:50: : Error: motor phase A disconnected on drivers 2
13:56:45: : Error: motor phase A disconnected on drivers 2
13:56:40: : Error: motor phase A disconnected on drivers 2
13:56:35: : Error: motor phase A disconnected on drivers 2
13:56:29: : Error: motor phase A disconnected on drivers 2
13:56:24: : Error: motor phase A disconnected on drivers 2
13:56:19: : Error: motor phase A disconnected on drivers 2
13:56:14: : Error: motor phase A disconnected on drivers 2
13:56:09: : Error: motor phase A disconnected on drivers 2
13:56:04: : Error: motor phase A disconnected on drivers 2
13:55:59: : Error: motor phase A disconnected on drivers 2
13:55:54: : Error: motor phase A disconnected on drivers 2
13:55:48: : Error: motor phase A disconnected on drivers 2
13:55:43: : Error: motor phase A disconnected on drivers 2
13:55:38: : Error: motor phase A disconnected on drivers 2
13:55:32: : Error: motor phase A disconnected on drivers 2
13:55:27: : Error: motor phase A disconnected on drivers 2
13:55:22: : Error: motor phase A disconnected on drivers 2
13:55:17: : Error: motor phase A disconnected on drivers 2
thanks in advance .

hi, its the print head that moves in direction of the bed... its a cr-10 s3 that i am trying to do upgrade...

i think the problem its in the homez.g and eventually also in homeall.g. i gona try make the home.z more similar to homey.g or homex.g..

thanks

@phaedrux said in G28 Z Error: G0/G1: insufficient axes homed:

M564 H0

Thanks for the help ... it moving in right direction now ,when we set for exemple +5mm it goes up 5 mm

but wen tried homing z it goes up indefinitely and give this error
M112
M999
Error: Homing failed

the probe is wired to the z probe socket in duet board, not in the z endstop socket.... there is any problem ???

thanks in advance

some pictures form interface to help

Hi and thanks in avance
i have been struggling with this problem at some days .... i am new to duet boards .
i have tried various configs but without sucess
can someone help me
Firmware Name: RepRapFirmware for Duet 2 WiFi/Ethernet
Firmware Electronics: Duet WiFi 1.02 or later
Firmware Version: 2.01(RTOS) (2018-07-26b2)
WiFi Server Version: 1.21RC4(08b3)
Web Interface Version: 1.22.1

i am using a NPN LJ18A3/8/Z-BX with the offsets x= 50 y =-10
i am Making a upgrade on cr10s 300300400

0_1534948848636_config.g

0_1534948871379_homez.g
Thanks in avance
Helder Silva