Topics created by jason71

If it heats quickly to 200C and then takes a long time to reach 220C then it sounds as though the auto tuning has over estimated the gain parameter. Let your hot end stabilise at 220C and then send M573 P1 to find the average PWM. Divide that figure into (220C - room temperature) and see how that figure compares with the 471 found by auto tuning.

@Corexy:

Yep, I'm loving mine too.

Really getting into the finer tweaking regarding extrusion, and am seeing better and better results.

Web control is awesome, and I can see why they couldn't understand me wanting to use SD cards (unless wifi was down).

From what I understand, you can upload (I guess to the onboard SD Card) and print from that. If (or when in my case…) Wifi Drops out, it doesn't really matter.

It's a shame I'm mega busy at the moment, partying tonight, gigging tomorrow, family time Sunday, then back to the day job Monday.
I can't see me having much time on it this weekend.