Hi, i have an issue with my bed heater, should i open an new topic or continue here?
i have done a:
m307 h0 s125
m307 h1 s250
this came out:
M307 H0 A90.0 C700.0 D10.0 S1.00 V0.0 B1
M307 H1 A578.0 C138.0 D7.5 S1.00 V12.8 B0
Starting 1 print works for a while..., but i had to cancel the print, and restart it. the bed cooled down to 110°C when i started a new print it would heat up and print very little and go in a heater error.
heatup from 30°C bed to 125° (works maybe)
heatup from 110°C bed to 125°C gives an error for sure!
i have a anycubic i3 since it has a solid framework, with a duet3dwifi borad inside.
what must i do.