Posts made by knehighprinter

@Veti
Thank for the info
The machine been running well
Most of my config are from others
Who have posted info on my type
Printer
This config is something i had not touched and didnt realise this was set to 24v
I will update and make the changes

HI would some help on resuming print
My printer is 12v

I keep getting this
M98 P"0:/macros/Start Resume"
Error: M24: Cannot resume while power voltage is low

M911 S21 R23 P"M913 X0 Y0 G91 M83 G1 Z3 E-5 F1000

; Resume macro file
G1 R1 X0 Y0 Z5 F5000 ; go to 5mm above position of the last print move
G1 R1 X0 Y0 Z0 ; go back to the last print move
M83 ; relative extruder moves

Firmware Name: RepRapFirmware for Duet 2 WiFi/Ethernet
Firmware Electronics: Duet WiFi 1.02 or later
Firmware Version: 2.03RC4 (2019-05-29b4)
WiFi Server Version: 1.21
Web Interface Version: 1.22.6

I would really love some help with this please guys cheers

@Danal thank you very much for the information

Hi all I'm from Australia i have a creality Cr10 s4 standard.
I just wanted to know if. A
mean well power supply rsp-320-24 work with cr 10s s4 and duet wifi borad
Because I already have this one spare to use

0