Topics created by larrylf

@larrylf Well, the extra logging didn't help, but after a lot of googling, and some playing around, I got it to work.
In case someone else runs into this issue, here is what I had to do:
(Connect via cable, ssh to the pi)

pi@duet3:~ $ sudo wpa_passphrase

type in your ssid and password. It will generate a long string.

pi@duet3:~ $ sudo nano /etc/wpa_supplicant/wpa_supplicate.conf

You will see your password in the clear here:

network={ ssid="myssid" psk="my password" }

delete your your password, and replace with the generated string from above:

network={ ssid="myssid" psk=415e02a3e30be000b075c2ea320327300f7ba73f9fb12347247b233e52babcd5 }

(Notice it is not in quotes)
save, and exit
Now, edit /etc/network/interfaces, and add these lines:

allow-hotplug wlan0 iface wlan0 inet dhcp wpa-ssid myssid wpa-psk 415e02a3e30be000b075c2ea320327300f7ba73f9fb12347247b233e52babcd5

(again - no quotes) Save, and exit.

Reboot (ok, you can probably just resart things, but rebooting works for sure).

I find that the UI on my SBC still shows an icon saying that wifi is not connected, but I can still access DWC from my browser now, over wifi.

@droftarts yes, the thermistor was a mistake - in fact, I seem to have the wrong sensors everwhere (PT100's in the mainboard TEMP, thermistor in the daughterboard). 😞
Fixed now, but frustrating...