Thanks for the solution dc42. Moving forward again now. Thanks raykholo for the reprap post (good info), and the x-y axis correction indeed.
Ive got some pictures but its already in pieces now. As far as cubepro stock internals, most of what I know are hot end/steeper specs but I did use an e3dv6 hot end while "stock". Stepper motors are motion control m42sth47-1684sc-s (fl42sth47-1684a-01 new version?). The TCO ("Thermal cut-off"-white square wired in series with the heater element) is a 145c 2a h145, I used a panasonic eyp2bh145 in replacement. The thermistor is 230k (resting at 209.2k at 72 deg), I used TE Connectivity 231k digikey pn 223-1180-ND (TE pn GC2315R-3-200) witch required drilling of the e3dv6 thermistor hole as the 231k bead was slightly larger. The e3dv6 heater I used was a 24v 30w wired with the TCO in series. That is about all I have but I hope its useful.
