@o_lampe Thank you for your email.
To the consideration of the z axis,
the trident has very sturdy xycore mechanisms and whole hotend with extruder and z axis weight about 611g.
Also with 5 axis movement there will be no need for rapid movement of X and y axis.
When I tested printing with normal 3 axis slicer it may look wobbly but the prints came out nice.
I am using in this way the 6hc board with a full potential with stepper motors.
When I have been designing the hotend from mainly used parts what I had lying around so that is the result of it.
But in the future if the problem become with the stability, is already on my mind to design a new version of the z axis mechanism with two linear rails and lead screw for the z axis stepper motor and maybe liquid cooling for the hotend.
The main goal is to make the hotend available for maximum movement and reach around the rotary bed.
Posts made by Mafco77
-
RE: 5axis Voron Trident mod with Duet6hc
-
5axis Voron Trident mod with Duet6hc
Hello Everybody
I recently build a 5 axis conversion of open source printer Voron Trident 250 as a base and designed the 5 axis module with new printhead what is also Z axis.
Project 5 axis Voron Trident.pdf
If you would like to see it in a movement and indicator clock testing here is my
YouTube channel
https://www.youtube.com/channel/UCL7oZxzQpKNU-jJnElbkT3wNow I am already testing some full 5 axis printing still work in a progress
-
RE: Stratadue: Duet 2 to Stratasys Interface
@aj-quick Hello, I would be really interested in ordering the Stratadue PCB. Is this project still active or where could buy this adapter? Thank you very much.