@nirin
There's probably not going to be a similar functionality to DWC because PanelDue doesn't use a browser.
If you run RRF 3.5 there is a better option to creating a macro button for each filament.
This macro takes advantage of M291 and will allow you to put your filaments into a list and cycle through the pages of them until you find the one you want.
You could simply use M291 S7 to prompt for the name of the filament you want to change to, which would be a simpler macro, but would require you to type it in exactly as it is in DWC
This way you can cut and past your filament names from DWC into the macro.
The best way to get the list is send M20 S0 P{directories.filaments} and copy the result from the console
You can adjust the number of buttons displayed on each page to suit yourself.
I found five buttons per page fitted on one line (7i)
If you use six, the NEXT button is on another line.
On the last page not all buttons will have a name and a cancel button appears.
EDIT: 7i PD can only display a max of 10 buttons, so I've limited it too that.
Download link at bottom of post.
IMG_8108.jpg
IMG_8109.jpg
; ChangeFilament.g
; requires RRF 3.5 or later!
; list of filaments must follow rules for array
; https://docs.duet3d.com/User_manual/Reference/Gcode_meta_commands#array-expressions
var filaments = {"ABS","ASA","EDGE","eFlex","eLastic","FLEX","HIPS","NGEN","NYLON","PA-CF","PC","PCABS","PDVF","PEEK","PEI","PEKK","PET","PETG","PLA","POM","PP","PSU","PVA","SCAFF","TPE","TPU",} ; list your filaments here
var maxBtns = 10; Max number of buttons per page on PanelDue. Adjust as required. 5 works OK on 7"paneldue - 9 is max!
; don't change below here
var thisTool = state.currentTool
if var.thisTool = -1
abort "No tool selected"
var thisFilament = move.extruders[tools[var.thisTool].extruders[0]].filament
var newFilament = null
if var.maxBtns > 10
set var.maxBtns = 10
echo "Paneldue can only display 10 buttons in total"
echo "Max buttons has been reset"
var thisPage = vector(var.maxBtns,"")
var numPages = floor(#var.filaments / (var.maxBtns - 1))
if mod(#var.filaments , var.maxBtns - 1) > 0
set var.numPages = var.numPages + 1
var pagesDone = 0;
var btnsDone = 0
var nextFilament = ""
var nextItem = 0
while var.pagesDone < var.numPages
set var.thisPage = vector(var.maxBtns,"")
set var.btnsDone = 0
while var.btnsDone < var.maxBtns-1
set var.nextItem = iterations + (var.pagesDone * (var.maxBtns-1))
if var.nextItem = #var.filaments
break
set var.thisPage[var.btnsDone] = var.filaments[var.nextItem]
set var.nextFilament = var.filaments[var.nextItem]
set var.btnsDone = var.btnsDone + 1
if var.pagesDone = var.numPages - 1
set var.thisPage[{var.maxBtns-1}] = "Cancel"
else
set var.thisPage[{var.maxBtns-1}] = "Next"
set var.pagesDone = var.pagesDone + 1
M291 P"Select filament" S4 K{var.thisPage}
if input = var.maxBtns-1
continue
else
set var.newFilament = var.thisPage[input]
break
if (var.newFilament = null) || (var.newFilament = "")
abort "No filaments chosen"
else
echo "Filament chosen : ", var.newFilament, " : commence change"
if var.newFilament = "noFilament"
M701 S{var.newFilament}
if result != 0
abort "Error during loading"
M703
else
if (var.thisFilament != "noFilament") && (var.thisFilament != null)
M702
M701 S{var.newFilament}
if result != 0
abort "Error during loading"
M703
FilamentChange.g
