Topics created by paulg4h

@misterjtc this is being worked on, but at this stage I don't know which improvements will be ready in time for the next 3.5 release candidate and hence in 3.5 stable.

@sindarius @jay_s_uk

I grab the latest from here:
https://github.com/Duet3D/DWC-CNC/releases

Awesome!

You dit a great job!

@dc42 many thank's!

I add this line in my config.g

; Set Cartesian type and segment interval one second and length 3mm M669 K0 S1 T3

In the middle of a 200mm straight cut the pause will be done within the second and move set with M669

So this works and I will add this line to my CNC too, btw. I do not see any slowness in normal cut and engrave jobs too.

@dc42
Is it possible to allow even lower rpm readings? My flowsensor gives 35rpm at minimum...

@droftarts
Many thank's for your suggestion I will try it.