Topics created by racitup

@racitup in case you are using an E3DRevo hot end, and for the benefit of anyone who is and encounters this thread: early E3D Revo hot ends with white thermistor leads develop problems with the thermistor after a while, with this sort of symptom. The more recent ones with blue thermistor leads are good.

@o_lampe I don't think we've ever included deployprobe.g and retractprobe.g in a firmware release, or indeed anything in the sys file. If you start with a factory or blank SD card and use the SD_Card_Contents.zip from https://github.com/Duet3D/Duet-2-Hardware/tree/master/Duet2/SD Card Contents you don't get those two files, though confusingly you get a homedelta.g that must be deleted if you are running a cartesian or coreXY machine.

Ian

@racitup It turns out I had deployprobe.g and retractprobe.g in sys which was causing the issue.

v1.26.1 (2.05.1) now appears to be working okay.