Posts made by RedFlash

undefined

@dc42
It‘s a Fysetc clone from Ali, 5 month in use.
I will throw that crap away and get a real one.

Thanks a lot for your help.

undefined

6.6.2021, 17:42:42 	M122
=== Diagnostics ===
RepRapFirmware for Duet 3 MB6HC version 3.3RC3+4 (2021-06-05 16:20:17) running on Duet 3 MB6HC v0.6 or 1.0 (standalone mode)
Board ID: 08DJM-956BA-NA3TJ-6J1FG-3S86S-TU9YS
Used output buffers: 1 of 40 (18 max)
=== RTOS ===
Static ram: 150896
Dynamic ram: 92432 of which 392 recycled
Never used RAM 110472, free system stack 216 words
Tasks: NETWORK(ready,27.8%,272) ETHERNET(notifyWait,0.1%,117) HEAT(delaying,0.0%,331) Move(notifyWait,0.0%,302) CanReceiv(notifyWait,0.0%,946) CanSender(notifyWait,0.0%,373) CanClock(delaying,0.0%,340) TMC(notifyWait,7.0%,93) MAIN(running,64.4%,924) IDLE(ready,0.6%,29), total 100.0%
Owned mutexes:
=== Platform ===
Last reset 00:00:18 ago, cause: software
Last software reset at 2021-06-06 17:42, reason: MemoryProtectionFault mmarValid daccViol, GCodes spinning, available RAM 107616, slot 0
Software reset code 0x4163 HFSR 0x00000000 CFSR 0x00000082 ICSR 0x00427804 BFAR 0x20028009 SP 0x2041b168 Task MAIN Freestk 1657 ok
Stack: 00000000 00000001 00000001 00000000 00000000 0047a427 0047a426 61030000 00000000 0047a427 2042b7e8 00000000 00000000 0047a76f 00000000 20419408 00000000 00000000 198a2d17 a5a5a5a5 a5a5a5a5 2042d834 00000000 00000001 00000000 0047a427 2042d834
Error status: 0x00
Aux0 errors 0,0,0
Step timer max interval 125
MCU temperature: min 40.7, current 41.2, max 41.3
Supply voltage: min 24.0, current 24.1, max 24.1, under voltage events: 0, over voltage events: 0, power good: yes
12V rail voltage: min 12.1, current 12.1, max 12.2, under voltage events: 0
Heap OK, handles allocated/used 0/0, heap memory allocated/used/recyclable 0/0/0, gc cycles 0
Driver 0: position 0, standstill, reads 38456, writes 15 timeouts 0, SG min/max 0/0
Driver 1: position 0, standstill, reads 38456, writes 15 timeouts 0, SG min/max 0/0
Driver 2: position 0, standstill, reads 38456, writes 15 timeouts 0, SG min/max 0/0
Driver 3: position 0, standstill, reads 38456, writes 15 timeouts 0, SG min/max 0/0
Driver 4: position 0, standstill, reads 38456, writes 15 timeouts 0, SG min/max 0/0
Driver 5: position 0, standstill, reads 38457, writes 15 timeouts 0, SG min/max 0/0
Date/time: 2021-06-06 17:42:41
Slowest loop: 4.01ms; fastest: 0.05ms
=== Storage ===
Free file entries: 10
SD card 0 detected, interface speed: 25.0MBytes/sec
SD card longest read time 1.0ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 125, maxWait 0ms, bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== AuxDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters = 0 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Segments left: 0
Movement lock held by null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon is idle in state(s) 0
Aux2 is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty.
=== CAN ===
Messages queued 164, send timeouts 162, received 0, lost 0, longest wait 0ms for reply type 0, peak Tx sync delay 0, free buffers 49 (min 49), ts 94/0/0
Last cancelled message type 30 dest 127
=== Network ===
Slowest loop: 2.47ms; fastest: 0.02ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions Telnet(0), 0 sessions
HTTP sessions: 1 of 8
- Ethernet -
State: active
Error counts: 0 0 1 0 0
Socket states: 5 2 2 2 2 0 0 0
6.6.2021, 17:34:44 	M32 "0:/gcodes/CFFFP_towel_holder.gcode"
File 0:/gcodes/CFFFP_towel_holder.gcode selected for printing

undefined

@dc42
Oh man. Didn`t see the +. Hold on..

undefined

@dc42
It still resets.

6.6.2021, 17:21:15 	M122
=== Diagnostics ===
RepRapFirmware for Duet 3 MB6HC version 3.3RC3 (2021-05-26 12:29:42) running on Duet 3 MB6HC v0.6 or 1.0 (standalone mode)
Board ID: 08DJM-956BA-NA3TJ-6J1FG-3S86S-TU9YS
Used output buffers: 10 of 40 (24 max)
=== RTOS ===
Static ram: 150784
Dynamic ram: 92436 of which 380 recycled
Never used RAM 110592, free system stack 192 words
Tasks: NETWORK(ready,25.8%,232) ETHERNET(notifyWait,0.1%,117) HEAT(delaying,0.0%,295) Move(notifyWait,0.0%,302) CanReceiv(notifyWait,0.0%,945) CanSender(notifyWait,0.0%,374) CanClock(delaying,0.0%,333) TMC(notifyWait,7.9%,93) MAIN(running,65.5%,924) IDLE(ready,0.6%,29), total 100.0%
Owned mutexes:
=== Platform ===
Last reset 00:00:17 ago, cause: watchdog
Last software reset at 2021-06-06 15:22, reason: MemoryProtectionFault mmarValid daccViol, GCodes spinning, available RAM 115676, slot 1
Software reset code 0x4163 HFSR 0x00000000 CFSR 0x00000082 ICSR 0x00427804 BFAR 0x000000cd SP 0x2041fbe0 Task MAIN Freestk 1670 ok
Stack: 00000000 00000000 00000000 00000000 00000081 00442ab5 004296c6 41030000 00000000 00000001 00000000 0046b1e7 2042b6e4 00000000 00000000 0046b535 00000000 0046b6e9 a5a5a5a5 ffffffff 2042b6e4 2041e168 2042ba7c ffffffff 00000000 00000003 2042ba78
Error status: 0x00
Aux0 errors 0,0,0
Aux1 errors 0,0,0
Step timer max interval 130
MCU temperature: min 39.3, current 40.2, max 40.4
Supply voltage: min 24.0, current 24.1, max 24.1, under voltage events: 0, over voltage events: 0, power good: yes
12V rail voltage: min 12.1, current 12.1, max 12.2, under voltage events: 0
Heap OK, handles allocated/used 0/0, heap memory allocated/used/recyclable 0/0/0, gc cycles 0
Driver 0: position 0, standstill, reads 33139, writes 15 timeouts 0, SG min/max 0/0
Driver 1: position 0, standstill, reads 33139, writes 15 timeouts 0, SG min/max 0/0
Driver 2: position 0, standstill, reads 33139, writes 15 timeouts 0, SG min/max 0/0
Driver 3: position 0, standstill, reads 33139, writes 15 timeouts 0, SG min/max 0/0
Driver 4: position 0, standstill, reads 33140, writes 15 timeouts 0, SG min/max 0/0
Driver 5: position 0, standstill, reads 33140, writes 15 timeouts 0, SG min/max 0/0
Date/time: 2021-06-06 17:21:14
Slowest loop: 4.16ms; fastest: 0.05ms
=== Storage ===
Free file entries: 10
SD card 0 detected, interface speed: 25.0MBytes/sec
SD card longest read time 1.0ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 125, maxWait 0ms, bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== AuxDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters = 0 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Segments left: 0
Movement lock held by null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon is idle in state(s) 0
Aux2 is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty.
=== CAN ===
Messages queued 157, send timeouts 155, received 0, lost 0, longest wait 0ms for reply type 0, peak Tx sync delay 0, free buffers 49 (min 49), ts 90/0/0
Last cancelled message type 30 dest 127
=== Network ===
Slowest loop: 2.33ms; fastest: 0.02ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions Telnet(0), 0 sessions
HTTP sessions: 1 of 8
- Ethernet -
State: active
Error counts: 0 0 1 0 0
Socket states: 5 2 2 2 2 0 0 0
6.6.2021, 17:16:25 	M32 "0:/gcodes/CFFFP_towel_holder.gcode"
File 0:/gcodes/CFFFP_towel_holder.gcode selected for printing

undefined

@siam
It was the same with 3.3rc3, but in the log there was „cause:watchdog“.

I‘ll update again i take a new M122.

undefined

@siam
It was installed and i downgraded. All modules were disconnected.

undefined

Hi.
My HevORT with a Duet 3 board restarts after a couple minutes printing.

The board had the firmware 3.3rc3, a toolboard and an accelerometer installed when the error appears the first time. I completely erase and reinstalled 3.2.2, changed the SD card and disconnected the toolboard and the LIS3DH.
It still appears.

M 122
=== Diagnostics ===
RepRapFirmware for Duet 3 MB6HC version 3.2.2 running on Duet 3 MB6HC v0.6 or 1.0 (standalone mode)
Board ID: 08DJM-956BA-NA3TJ-6J1FG-3S86S-TU9YS
Used output buffers: 1 of 40 (20 max)
=== RTOS ===
Static ram: 149788
Dynamic ram: 93284 of which 44 recycled
Never used RAM 115716, free system stack 188 words
Tasks: NETWORK(ready,195) ETHERNET(blocked,103) HEAT(blocked,278) CanReceiv(blocked,927) CanSender(blocked,371) CanClock(blocked,351) TMC(blocked,50) MAIN(running,1117) IDLE(ready,19)
Owned mutexes:
=== Platform ===
Last reset 00:47:17 ago, cause: software
Last software reset at 2021-06-06 15:22, reason: MemoryProtectionFault mmarValid daccViol, GCodes spinning, available RAM 115676, slot 1
Software reset code 0x4163 HFSR 0x00000000 CFSR 0x00000082 ICSR 0x00427804 BFAR 0x000000cd SP 0x2041fbe0 Task MAIN Freestk 1670 ok
Stack: 00000000 00000000 00000000 00000000 00000081 00442ab5 004296c6 41030000 00000000 00000001 00000000 0046b1e7 2042b6e4 00000000 00000000 0046b535 00000000 0046b6e9 a5a5a5a5 ffffffff 2042b6e4 2041e168 2042ba7c ffffffff 00000000 00000003 2042ba78
Error status: 0x00
Aux0 errors 0,0,0
Aux1 errors 0,0,0
MCU temperature: min 39.2, current 39.5, max 40.9
Supply voltage: min 24.0, current 24.1, max 24.1, under voltage events: 0, over voltage events: 0, power good: yes
12V rail voltage: min 12.0, current 12.1, max 12.2, under voltage events: 0
Driver 0: position 0, standstill, reads 3177, writes 15 timeouts 0, SG min/max 0/0
Driver 1: position 0, standstill, reads 3178, writes 15 timeouts 0, SG min/max 0/0
Driver 2: position 0, standstill, reads 3178, writes 15 timeouts 0, SG min/max 0/0
Driver 3: position 0, standstill, reads 3178, writes 15 timeouts 0, SG min/max 0/0
Driver 4: position 0, standstill, reads 3178, writes 15 timeouts 0, SG min/max 0/0
Driver 5: position 0, standstill, reads 3178, writes 15 timeouts 0, SG min/max 0/0
Date/time: 2021-06-06 16:10:09
Slowest loop: 5.86ms; fastest: 0.05ms
=== Storage ===
Free file entries: 10
SD card 0 detected, interface speed: 25.0MBytes/sec
SD card longest read time 1.3ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 125, maxWait 0ms, bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== AuxDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters = 0 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Segments left: 0
Movement lock held by null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon is idle in state(s) 0
Aux2 is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 5.95ms; fastest: 0.02ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions Telnet(0), 0 sessions
HTTP sessions: 2 of 8

Ethernet -
State: active
Error counts: 0 0 1 0 0
Socket states: 5 2 2 2 2 0 0 0
=== CAN ===
Messages queued 11344, send timeouts 25528, received 0, lost 0, longest wait 0ms for reply type 0, free buffers 47