Posts made by reisusjesus

Is there an admin available that can help me with the return process?

@droftarts

Yes, that is the reset process I followed. CAN address 123 is available as well as the firmware being present.

I have 3 23cl's on a CAN bus. Two of them operating normally. CAN address changes and all. Which are set to 70 and 71. The third one, out of the box, lit both led's immediately. They never flash and won't register in DWC.

I've ruled out wiring issues. The issue persists after swapping cables from a working motor. Resetting it as per the official documentation doesn't change a thing.
All 3 motors share vin and ground direct to the psu and it's wired in between the working motors on the CAN bus. I've tried going directly from the mini 5. Same result.

The CAN order is as follows
Mini 5
3HC
M23CL
M23CL {the problem child}
M23CL
1LC
1LC

Am I missing something or is it DOA?

I hoped writing this out would trigger a eureka.

Alas, earwax.