Topics created by Robny

Fan1 is configured as a thermostatic hot end fan by default, which is why it will turn on if you have any unusual temperature indications - see the previous reply.

Thanks both, thats what it was, I only had the bed thermistor plugged in but hadn't yet configured it correctly.

Thanks for the reassurance.
Rob

Its Sorted 🙂

I really do appreciate your help and being in constant contact….thank you.

As it happens it turned out to be a bad Ethernet cable, I was using the wrong type of Ethernet cable, soon as I changed it, it loaded straight into the interface.

Thanks again, excited again 🙂
Rob