Posts made by Simon 1

@Simon-1 Thank's for the reply but i find a firmware who working, ... My first two tries with firmware 3.5 did not work I had a black screen and the second time the colors were weird so I tried version 3.4 which worked the first time but I had the problem with the buttons of the heating room which did not work...

So I decided to retry all the 3.5 firmwares and finally I found one that worked.
I'm just starting out and I'm not very knowledgeable in programming and I just migrated my printer to firmware 3.5.3 a few weeks ago!!

there is a good difference between version 2.5 and 3.5.3...

Currently I am trying to make a trigger to turn on the power supply and turn it off with the same trigger if it is already on...

The heat chamber is solve !!!

@Simon-1 said in Paneldue and heat chamber controle:

Does anyone know how to configure the heater in the heating chamber to be able to adjust the temperature on the paneldue?

When I try to enter a temperature, it immediately clears when I press set

Thank's for your help

By the way i have 2 different firmware version and the 3.5 work but the 3.4... the 3.5 work on my personal printer but
the one i made a mod is for the company where i work an the paneldue is in 3.4 but the controler is in 3.5.3 i wonder
if it because of that it not working ??? the problem is the paneldue i receive dont work with the 3.5 firmware the colors
are weird ! i dont try all the 3.4 version of firmware for the paneldue maybe there a version who working .... I have to
look for that ....

Does anyone know how to configure the heater in the heating chamber to be able to adjust the temperature on the paneldue?

When I try to enter a temperature, it immediately clears when I press set

Thank's for your help