Greetings,
I am in the process of building a very large format 3D printer (1,800mm X 1,800mm). I am looking for some advice to see if the Duet 3 is a good choice for my controller. I am completely new to this hardware, could anyone help know if this is suitable?
Extruder (Two Stepper Motors)
- Two Bondetch QR-M Extruders (https://www.bondtech.se/product/qr-m-extruder/)
- Mosquito Magnum+ Liquid Cool (https://www.sliceengineering.com/products/mosquito-magnum-plus-liquid-1-75?variant=43671175397617)
- RTD Pt1000 thermistor
- Two 50 Watt heaters
X,Y,Z Motors (3 Servo Motors, 4 Stepper)
- Y Axis (2 Step/Dir Servo Motors)
- X Axis (1 Step/Dir Servo Motors)
- Z Axis (4 Stepper Motors - Slaved together, all corners of 1,800mm stage have a lead screw)
- 7 Limit switches (4-Z, 2-Y, 1-X)
I am planning on using CURA as a slicer. Does my configuration seem to be outside of the bounds of what the Duet 3 can handle? I would really appreciate board recommendations.
Thanks!!