Topics created by TeddyFluffkins

Have you tried upgrading to the newer RRF and DCS?

@dc42 said in Fried 6R8 inductor and Z1284PI - why? Wiring problems:

@Monkeh said in Fried 6R8 inductor and Z1284PI - why? Wiring problems:

@TeddyFluffkins said in Fried 6R8 inductor and Z1284PI - why? Wiring problems:

I switched one of the two endstops to blk GND and red 5V

You placed a dead short across the 5V rail.

Correct. But we expect Duet 3 to survive such a short, just as Duet 2 does.

@jay_s_uk said in Fried 6R8 inductor and Z1284PI - why? Wiring problems:

And for microswitches, you should be using the in.io and ground, not 5v and ground

Also correct.

Thanks, For that Endstop Hint.
It would be great to get my Wiring and G-Code Setup looked over before i'll turn it on the first Time, because i've a exotic Conductive Z Endstop where i can find only duet 2 informations for.
My genuine duet 3 6HC is directly from duet too.
Thanks for that great Service.

Cheers,