it still only effects port 0
Latest posts made by therealawyt
-
RE: cooling fan under-volt
it seems that adding the f3 doesn't do anything as when I turn on what is supposed to be the tool fan nothing happens. but when I turn up the slider for that specific fan it turns on
-
RE: cooling fan under-volt
ok problem solved my 0 port is still dead but i got the other ones working do you by chance know how to tell simplify 3d to use that fan for part cooling?
-
RE: cooling fan under-volt
M106 P0 S0 I0 F500 H-1
M106 P1 S1 I0 F500 H1:0 T45
M106 P2 S1 I0 F500 H1:0 T45
M106 P3 S0 I0 F500 H-1to my knowledge port 2 is broken so i added port 3 and it only comes on for a little when the board resets
-
RE: cooling fan under-volt
ok so I figured out how to change it but the fan doesn't stay on. when i turn the machine on it goes on for a few seconds then turns off
-
RE: cooling fan under-volt
the fan works when plugged into a different port. do you know how to switch on another one of the sometimes on fan ports in the firmware?
-
RE: cooling fan under-volt
its plugged into vfan the other pins are 24 I'm not sure what board I'm using all I know is its a duet wifi board.
-
RE: cooling fan under-volt
@phaedrux 24 the cooling fan is the only thing that isn't reading 24 for some reason
-
cooling fan under-volt
part cooling fan only outputs 9 volts. is there a way to increase it to 24?