@bearer
I moved the antenna as close as I could, it looks like it is pulling in Battlestar Pegasus Mainframe and BattlePi24 on every scan, both of which are broadcasting 2.4, and the latter is 2.4 only.
2.4 is pretty crowded here but thats about the best I can do. It didn't seem to be a problem on my older duet with internal antenna.
@bearer
to eliminate that possibility as well as the 2.4ghz issue (our network is simulcast 2.4/5.0) I created an entirely new 2.4ghz-only SSID with the same results.
@bearer
That was exactly what was on the board out of the box.
e:
M552 S0
ok
WiFi module started
M588 S"*"
ok
M552
WiFi module is disabled
ok
M111 P14 S1
Debugging enabled for modules: WiFi(14)
Debugging disabled for modules: Platform(0) Network(1) Webserver(2) GCodes(3) Move(4) Heat(5) DDA(6) Roland(7) Scanner(8) PrintMonitor(9) Storage(10) PortControl(11) DuetExpansion(12) FilamentSensors(13) Display(15)
ok
M552 S-1
ok
M552 S0
WiFi:
WiFi: ets Jan 8 2013,rst cause:2, boot mode:(3,6)
WiFi:
ok
WiFi: load 0x4010f000, len 1384, room 16
WiFi: tail 8
WiFi: chksum 0x2d
WiFi: csum 0x2d
WiFi: v3fff168c
WiFi: ~ld
WiFi module started
G4 S1
ok
M587 S"Battlestar Pegasus Mainframe" P"***"
ok
M552 S1
ok
WiFi:
WiFi: add if0
WiFi: wifi evt: 8
WiFi: scandone
WiFi: ../src/SocketServer.cpp(353): found network dobry22
WiFi: ../src/SocketServer.cpp(353): found network Alex WiFi
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: ../src/SocketServer.cpp(353): found network Brother Eye
WiFi: ../src/SocketServer.cpp(353): found network luk-ela
WiFi: ../src/SocketServer.cpp(353): found network PS4-A490FF8D684C
WiFi: ../src/SocketServer.cpp(353): found network PS4-3B1F4A9CD2C0
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network Wifi is Jericho!!
WiFi: ../src/SocketServer.cpp(353): found network Toilet Cam #12
WiFi: ../src/SocketServer.cpp(353): found network Loki1
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: ../src/SocketServer.cpp(353): found network ATT528s735
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: ../src/SocketServer.cpp(353): found network The Room Of Requirement
WiFi reported error: no known networks found
WiFi module is idle
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: scandone
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network Brother Eye
WiFi: ../src/SocketServer.cpp(353): found network ATT528s735
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: ../src/SocketServer.cpp(353): found network luk-ela
WiFi: ../src/SocketServer.cpp(353): found network PS4-3B1F4A9CD2C0
WiFi: ../src/SocketServer.cpp(353): found network PS4-A490FF8D684C
WiFi: ../src/SocketServer.cpp(353): found network Toilet Cam #12
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network Wifi is Jericho!!
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network Petersen
WiFi: ../src/SocketServer.cpp(353): found network SEC_LinkShare_836496
WiFi: ../src/SocketServer.cpp(353): found network Loki1
WiFi: ../src/SocketServer.cpp(353): found network TK2.4
WiFi: ../src/SocketServer.cpp(353): found network dobry22
WiFi: ../src/SocketServer.cpp(353): found network The Room Of Requirement
WiFi: ../src/SocketServer.cpp(353): found network degapudi
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network CRAZYVirus
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network MAXIMUS
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: ../src/SocketServer.cpp(353): found network NETGEAR56
WiFi: ../src/SocketServer.cpp(353): found network
WiFi reported error: no known networks found
WiFi module is idle
WiFi: ../src/SocketServer.cpp(353): found network TP-LINK_D28A
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: scandone
WiFi: ../src/SocketServer.cpp(353): found network dobry22
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: ../src/SocketServer.cpp(353): found network Alex WiFi
WiFi: ../src/SocketServer.cpp(353): found network luk-ela
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: ../src/SocketServer.cpp(353): found network PS4-A490FF8D684C
WiFi: ../src/SocketServer.cpp(353): found network PS4-3B1F4A9CD2C0
WiFi: ../src/SocketServer.cpp(353): found network Toilet Cam #12
WiFi: ../src/SocketServer.cpp(353): found network NETGEAR20
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network Wifi is Jericho!!
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: ../src/SocketServer.cpp(353): found network Srbija 2G
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: ../src/SocketServer.cpp(353): found network Loki1
WiFi: ../src/SocketServer.cpp(353): found network ATT528s735
WiFi: ../src/SocketServer.cpp(353): found network degapudi
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network MAXIMUS
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi reported error: no known networks found
WiFi module is idle
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: ../src/SocketServer.cpp(353): found network CRAZYVirus
WiFi: scandone
WiFi: ../src/SocketServer.cpp(353): found network ATT528s735
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network Brother Eye
WiFi: ../src/SocketServer.cpp(353): found network dobry22
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: ../src/SocketServer.cpp(353): found network luk-ela
WiFi: ../src/SocketServer.cpp(353): found network Battlestar Pegasus Mainframe
WiFi: ../src/SocketServer.cpp(353): found network BattlePi24
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: ../src/SocketServer.cpp(353): found network PS4-A490FF8D684C
WiFi: ../src/SocketServer.cpp(353): found network NETGEAR20
WiFi: ../src/SocketServer.cpp(353): found network Wifi is Jericho!!
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network Toilet Cam #12
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: ../src/SocketServer.cpp(353): found network Srbija 2G
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: ../src/SocketServer.cpp(353): found network PS4-3B1F4A9CD2C0
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: ../src/SocketServer.cpp(353): found network Loki1
WiFi: ../src/SocketServer.cpp(353): found network ATT3Hkz4Mq2.4
WiFi: ../src/SocketServer.cpp(353): found network The Room Of Requirement
WiFi: ../src/SocketServer.cpp(353): found network MAXIMUS
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: ../src/SocketServer.cpp(353): found network CRAZYVirus
WiFi: ../src/SocketServer.cpp(353): found network xfinitywifi
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: ../src/SocketServer.cpp(353): found network degapudi
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: ../src/SocketServer.cpp(353): found network
WiFi: sleep enable,type: 2
WiFi: wifi evt: 2
WiFi: scandone
WiFi: state: 0 -> 2 (b0)
WiFi: state: 2 -> 0 (2)
WiFi: reconnect
WiFi: wifi evt: 1
WiFi: STA disconnect: 2
WiFi: scandone
WiFi: state: 0 -> 2 (b0)
WiFi: state: 2 -> 0 (2)
WiFi: reconnect
WiFi: wifi evt: 1
WiFi: STA disconnect: 2
WiFi: scandone
WiFi: state: 0 -> 2 (b0)
WiFi: state: 2 -> 0 (2)
WiFi: reconnect
WiFi reported error: Failed while trying to connect to Battlestar Pegasus Mainframe
WiFi module is idle
WiFi: wifi evt: 1
WiFi: STA disconnect: 2
WiFi: scandone
WiFi: del if0
WiFi: usl
WiFi: mode : null
WiFi: wifi evt: 8
WiFi: mode : sta(bc:dd:c2:2d:5e:3e)
WiFi: add if0
WiFi: wifi evt: 8
WiFi: scandone
after that it just starts looping. Also, I was able to start it up in AP mode and I can get into DWC that way if needed.
in addition, subsequent attempts (restarting, forgetting and re-adding network, creating a new SSID and connecting to that instead) have all yielded the same variety of wifi error messages including:
-Error retrieving WiFi status message: bad reply format version
Error retrieving WiFi status message: SPI timeout
Failed to change WiFi mode (code -7)
unfortunately the replacement from filastruder has an identical issue
M552 S0
ok
WiFi module started
M587 S"***" P"***"
ok
M552 S1
ok
...
WiFi reported error: Failed while trying to connect to ***
WiFi module is idle
M552
WiFi module is changing mode
ok
WiFi reported error: Failed while trying to connect to ***
WiFi module is idle
M552
WiFi module is changing mode
ok
M115
FIRMWARE_NAME: RepRapFirmware for Duet 2 WiFi/Ethernet FIRMWARE_VERSION: 2.03 ELECTRONICS: Duet WiFi 1.02 or later FIRMWARE_DATE: 2019-06-13b2
ok
M122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 2.03 running on Duet WiFi 1.02 or later
Board ID: 08DLM-996RU-N85T0-6JTD2-3S46Q-1UTZP
Used output buffers: 1 of 24 (9 max)
=== RTOS ===
Static ram: 25680
Dynamic ram: 93340 of which 164 recycled
Exception stack ram used: 256
Never used ram: 11632
Tasks: NETWORK(ready,1268) HEAT(blocked,916) MAIN(running,3808) IDLE(ready,160)
Owned mutexes:
=== Platform ===
Last reset 00:08:27 ago, cause: power up
Last software reset details not available
Error status: 0
Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest block write time: 0.0ms, max retries 0
MCU temperature: min 28.0, current 32.6, max 32.7
Supply voltage: min 1.7, current 1.7, max 1.8, under voltage events: 0, over voltage events: 0, power good: no
Driver 0: ok, SG min/max not available
Driver 1: ok, SG min/max not available
Driver 2: ok, SG min/max not available
Driver 3: ok, SG min/max not available
Driver 4: ok, SG min/max not available
Date/time: 1970-01-01 00:00:00
Cache data hit count 1006782636
Slowest loop: 100.14ms; fastest: 0.06ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Move ===
Hiccups: 0, FreeDm: 169, MinFreeDm: 169, MaxWait: 0ms
Bed compensation in use: none, comp offset 0.000
=== DDARing ===
Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0
=== Heat ===
Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Segments left: 0
Stack records: 1 allocated, 0 in use
Movement lock held by null
http is idle in state(s) 0
telnet is idle in state(s) 0
file is idle in state(s) 0
serial is ready with "M122" in state(s) 0
aux is idle in state(s) 0
daemon is idle in state(s) 0
queue is idle in state(s) 0
autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 1.26ms; fastest: 0.00ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)
HTTP sessions: 0 of 8
- WiFi -
Network state is changing mode
WiFi module is trying to connect
Failed messages: pending 0, notready 0, noresp 0
WiFi firmware version 1.23
WiFi MAC address bc:dd:c2:2d:5e:3e
WiFi Vcc 3.36, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 27224
Socket states: 0 0 0 0 0 0 0 0
ok
WiFi reported error: Failed while trying to connect to ***
WiFi module is idle
at this point I have done literally nothing but open the box, connect the antenna and perform the steps described in : https://duet3d.dozuki.com/Guide/1.)+Getting+Connected+to+your+Duet/7 , sans firmware update. 2.03 was what I was running on my first board connected to the same network, before the sd card slot died.
@bearer
YAT is the only way I have to talk to the board right now since I can't connect to DWC, so firmware is done and renamed manually.
Ultimately I just want to figure out if I need to send this board back or not, updating to the correct firmware has never been this difficult.
@bearer
2.05.1 being the firmware reported by the board. I assume its relevant, but I'm sorry if my nomenclature isn't correct here.
The title of the github page I downloaded this firmware from is literally "Release 2.05.1" so I assume that both the combined firmware and wifi firmware linked therein are the correct ones to use. M122 reports that both are those versions are installed on their respective parts. If this isn't correct, please let me know.
RepRapFirmware for Duet 2 WiFi/Ethernet version 2.05.1 running on Duet WiFi 1.02 or later
WiFi firmware version 1.23
@dc42
Positive. Any reason I shouldn't be using 2.05.1 and 1.23?
I have repeated the process a few times and occasionally have seen other errors including Code 4, Code 7, status error: Bad Reply format and status error: SPI timeout
M122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 2.05.1 running on Duet WiFi 1.02 or later
Board ID: 08DLM-996RU-N8PS4-7JKDG-3S86P-TBA7N
Used output buffers: 1 of 24 (10 max)
=== RTOS ===
Static ram: 25712
Dynamic ram: 94000 of which 64 recycled
Exception stack ram used: 320
Never used ram: 10976
Tasks: NETWORK(ready,1268) DHTSENSOR(blocked,228) HEAT(blocked,912) MAIN(running,3692) IDLE(ready,160)
Owned mutexes:
=== Platform ===
Last reset 00:10:07 ago, cause: software
Last software reset time unknown, reason: User, spinning module GCodes, available RAM 11032 bytes (slot 0)
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x04433000 BFAR 0xe000ed38 SP 0xffffffff Task 0x4e49414d
Error status: 0
Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest block write time: 0.0ms, max retries 0
MCU temperature: min 33.4, current 33.5, max 33.8
Supply voltage: min 11.8, current 11.9, max 11.9, under voltage events: 0, over voltage events: 0, power good: yes
Driver 0: standstill, SG min/max not available
Driver 1: standstill, SG min/max not available
Driver 2: standstill, SG min/max not available
Driver 3: standstill, SG min/max not available
Driver 4: standstill, SG min/max not available
Date/time: 1970-01-01 00:00:00
Cache data hit count 971815164
Slowest loop: 99.82ms; fastest: 0.07ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Move ===
Hiccups: 0, FreeDm: 160, MinFreeDm: 160, MaxWait: 0ms
Bed compensation in use: none, comp offset 0.000
=== DDARing ===
Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0
=== Heat ===
Bed heaters = 0 -1 -1 -1, chamberHeaters = 2 -1
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Segments left: 0
Stack records: 2 allocated, 0 in use
Movement lock held by null
http is idle in state(s) 0
telnet is idle in state(s) 0
file is idle in state(s) 0
serial is ready with "M122" in state(s) 0
aux is idle in state(s) 0
daemon is idle in state(s) 0
queue is idle in state(s) 0
autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 1.28ms; fastest: 0.00ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)
HTTP sessions: 0 of 8
- WiFi -
Network state is changing mode
WiFi module is trying to connect
Failed messages: pending 0, notready 0, noresp 0
WiFi firmware version 1.23
WiFi MAC address bc:dd:c2:2d:64:f6
WiFi Vcc 3.47, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 26584
Socket states: 0 0 0 0 0 0 0 0
ok
WiFi reported error: Failed while trying to connect to ***
WiFi module is idle
@Phaedrux
Do you think this is a failed wifi module like dc42 suggested in the post I linked?
This board was already a replacement for another failed duet thats out of warranty 
The time you've spent typing these two posts is already >= the time it takes to skim the first few lines of diagnostic output, the other two YAT responses are two lines each and the rest of my procedure is documented both in bullets and in another thread with a similar issue.
If you have any other suggestions I'm all ears, but dropping into a thread and saying only that comes off very rudely.
e: not the machine right this second but hopefully this will help
RepRapFirmware for Duet 2 WiFi/Ethernet version 2.05 running on Duet WiFi 1.02 or later<LF>
Board ID: 08DLM-996RU-N8PS4-7JKDG-3S86P-TBA7N<LF>
Used output buffers: 14 of 24 (14 max)<LF>
=== RTOS ===<LF>
Static ram: 25712<LF>
Dynamic ram: 94000 of which 64 recycled<LF>
Exception stack ram used: 304<LF>
Never used ram: 10992<LF>
Tasks: NETWORK(ready,540) DHTSENSOR(blocked,228) HEAT(blocked,912) MAIN(running,3824) IDLE(ready,160)<LF>
Owned mutexes:<LF>
=== Platform ===<LF>
Last reset 00:03:52 ago, cause: power up<LF>
Last software reset details not available<LF>
Error status: 0<LF>
Free file entries: 10<LF>
SD card 0 detected, interface speed: 20.0MBytes/sec<LF>
SD card longest block write time: 0.0ms, max retries 0<LF>
MCU temperature: min 34.9, current 37.4, max 37.5<LF>
Supply voltage: min 0.0, current 0.0, max 0.1, under voltage events: 0, over voltage events: 0, power good: no<LF>
Driver 0: ok, SG min/max not available<LF>
Driver 1: ok, SG min/max not available<LF>
Driver 2: ok, SG min/max not available<LF>
Driver 3: ok, SG min/max not available<LF>
Driver 4: ok, SG min/max not available<LF>
Date/time: 1970-01-01 00:00:00<LF>
Cache data hit count 430705318<LF>
Slowest loop: 200.47ms; fastest: 0.05ms<LF>
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0<LF>=== Move ===<LF>
Hiccups: 0, FreeDm: 160, MinFreeDm: 160, MaxWait: 0ms<LF>
Bed compensation in use: none, comp offset 0.000<LF>
=== DDARing ===<LF>
Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0<LF>
=== Heat ===<LF>
Bed heaters = 0 -1 -1 -1, chamberHeaters = 2 -1<LF>
Heater 1 is on, I-accum = 0.0<LF>
=== GCodes ===<LF>
Segments left: 0<LF>
Stack records: 2 allocated, 0 in use<LF>
Movement lock held by null<LF>
http is idle in state(s) 0<LF>
telnet is idle in state(s) 0<LF>
file is idle in state(s) 0<LF>
serial is ready with "M122" in state(s) 0<LF>
aux is idle in state(s) 0<LF>
daemon is idle in state(s) 0<LF>
queue is idle in state(s) 0<LF>
autopause is idle in state(s) 0<LF>
Code queue is empty.<LF>=== Network ===<LF>
Slowest loop: 1280.47ms; fastest: 0.00ms<LF>
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)<LF>
HTTP sessions: 0 of 8<LF>- WiFi -<LF>
Network state is running<LF>
WiFi module is idle<LF>
Failed messages: pending 0, notready 0, noresp 0<LF>
WiFi firmware version 1.23<LF>
WiFi MAC address bc:dd:c2:2d:64:f6<LF>
WiFi Vcc 3.47, reset reason Turned on by main processor<LF>
WiFi flash size 4194304, free heap 26504<LF>
Socket states: 0 0 0 0 0 0 0 0<LF>ok<LF>```