i really hope so phaedrux it would be great if it can be done with macros, the 3 bed motors have 10mm travel each and they are mounted in a way that they can flex and move freely, I'm thinking if i dial it in as best as i can then the bed can do the rest to get it super level, also maybe around 1mm movement for the motors to do there thing, i think haha.
veti I've got 2 types of belt and pulleys to play with, T2.5 polyurethane and T2 standard black and its super easy to change ive made a system on the print head where you have 4 m5 bolts that draw in the belt and tension it then just lock them off, really hoping the bed leveling can be achieved.
mrehorstdmd this is something i put quite a bit of thought into oscillation I've got some guides made to run on the front of the bed with some v xtreme wheels to run in the extrusion i will have to take a picture and show you see what you think, planning on having them made of aluminium, i could mount a piece of extrusion behind the bed and run the wheel system there that's my backup plan 🤔, the screws are slotted into the bed, in the pictures i previously posted there are some silver m5 bolts poked in they are just to hold the bed in place while i was measuring , on the slotted ones they just have ceramic washers and nylock nut on the underside, as just mentioned to veti I've got 2 types of belt and pulleys and are quite easy to change but will take both of yours advise and use the standard belts when its up and running.
output-onlinejpgtools-8.jpg output-onlinejpgtools-7.jpg
so in summery it is possible to run this bizzare setup 😌