Posts made by tjdehaan

thanks everyone for the input, i just got home from work will be working on it , thanks again

im connected to my network and ip address is 10.0.0.7 says ok
ive done updates to firmware everything seems to be working great , i try to log into duettest.local and i get error message below.
everything was working great then suddenly stopped ,no matter what i try nothing works, please help

This site can’t be reached duettest.local’s server IP address could not be found.
Try:

Checking the connection
Checking the proxy, firewall, and DNS configuration
ERR_NAME_NOT_RESOLVED

@Phaedrux thank you

how can i turn z probe to mode 3

server ip address could not be found

i did m552 and it says wifi module connected to access point ip address is ok

then i reentered m587 with my loggin and it still will not let me log into dwc

i was on dwc and hit apply setting then it rebooted and diag light came on and now i cant get on dwc

wifi module on and connected but dwc wont work, m558 z probe type 1, yat communicates with board, how do i turn diag light off and return to normal operation

@dc42 ok thank you, will do

@bearer no i have to start my wifi everytime, no problems restarting tho

@phaedrux yes i even got another card and loaded all files a it and that card could not be mounted either

ok i need some help with this issue i just got into 3d printing about 1 month ago, got printer and upgrades put everything together and now im stuck, so got wifi up and running, i go to connect to dwc and i get:
duet cannot connect, check to see if sd card mounted and if all files are in /www folder, opened up yat put in m39 it says "no sd card mounted" then i put m21 in and it says" cannot mount sd card 0: code 13,
ive read different articles and found possible bad sd card slot: does any one have any thoughts. thank you for your time