Posts made by yatinsd

@dc42 I'm india! I bought from duet3d only!

Can it be replaced or something? I purchased this on 24 Feb 2018 and it came to me on March 10. Issue started just around those days(around 1-2march 2019)!

@dc42 I have tried everything! But not been able to resolve! Can I send it over to you? Or any other thing?

I need to replace the clock of the processor TXC12, I'm not able to differentiate which one is the model I need. Could anyone help with the datasheet or specs?

@dc42 the processor is in right orientation. I have got this thing soldered by a professional, and I myself have verified that its touching the right places! can the clock go bad in this??

@dc42 what should i check then? should ichange the clock? i have seen 0.2 mv across c45!!

Hi guys,
Has anyone attempted to change the processor in duet wifi v1.03? can you share your experience?

@dc42 did you see the clock after erasing the firmware?

@dc42 i have checked the voltage on v bus the voltage is 1.02v. DDP & DDM are continuous with pin 137-36 respectively. usb ground is continuous with controllers ground.

@dc42 is L6 at 1.2v correct?

I need to open my duet WiFi v1.03 file. What i need to know is when I try to download the .kicad file I get text in the browser, how to open this in kicad?

@dc42, mine is Duet wifi v1.03, I Mean the L5 & The L6 you asked me to measure if at 3.3v, in your last reply in this post.

Voltage at l5=3.3v, l6=1.2v

@dc42 my reset button is not moving properly once I press it doesn't move back! Can it be the reason? The voltage on the reset button is 3.03v

@dc42 I have checked thoroughly no R106 on my board! When I checked PDF schematic it showed internal 100k in processor for reset. My board is duet WiFi V1.03

@hedis no computer does not detect the board!

@hedis how to check if the reset line is high?

Yes all supply is there 3v 3.3v, also the 12v works fine! But clock is not generating