Best posts made by Zatsit

@t3p3tony
Many thanks to all my backers, who allowed Zatsit to be born!

Please excuse the somewhat chauvinistic enthusiasm of my compatriot Frederic: it is not French "en plus", it is just French. The French are considered pretentious all over the world, so there's no need to add to that!

Joking aside, thanks to Tony for drawing attention to Zatsit, and thanks also, of course, to my distinguished backers!

In this forum, you are all supposed to already have a 3D printer with a Duet controller on it. So let me also talk about accessories, which can be adapted to all existing machines, especially deltas.

Thanks to the engraved Hylite technology, it is very easy to make gimballed supports for remote accessories (extruder, blower fan). This has significant consequences on print quality, as the effectors can be lighter, parasitic forces on them are reduced, and the length of the Bowden tube can be halved. These brackets attach to any 6mm T-slot, so they are universally applicable. Here is a video that explains it.

The gimballed support for a Flystruder based on Titan extruder, adapts to absolutely any delta machine, with even more obvious improvements: the Bowden tube is reduced to 17cm, while disturbing as little as possible the movements of the Hot-End. Here is the video.

Finally, one of Zatsit's major innovations is its Hot-End, so simple that you won't believe it! Here is the video.

I first wanted to obtain a larger exchange chamber with cooling water, with many unnecessary complications, before realizing that it worked strictly as well with a simple 4/6mm tube, pierced! Since I have been using a pre-hole formed with a very precise biopsy punch, the seal is extremely reliable. And in two years, the Hot End has never jammed, with any filament. Never! The only problem I had was stupidly pulling a very hot TPU filament by hand, which obviously immediately stuck to the cold zone.

Since I have to put some coal in the boiler, let me to provide the link toward Kickstarter (with many interesting info, anyway). Thanks for watching!

@keyz182
Just after the end of the KS campaign, two new pages will appear on my website www.zatsit.fr : STORE and DOWNLOADS.

You will be able to download the configurations for the different systems I was able to try, including of course Duet WiFi.