Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Zatsit printer

    Scheduled Pinned Locked Moved
    3D Printing General Chat
    7
    27
    4.4k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • deckingmanundefined
      deckingman @Zatsit
      last edited by

      @zatsit Thanks for that. As I thought, it's not a simple process. Would you open to the idea of just supplying this part? I don't have a delta so the complete kit is of no interest to me. I would be needing batches of at least 6 and possible 12 at a time.

      Also, you didn't answer my second question which was how you cut the tube to length. If you don't want to answer that, I fully understand but if that is the case, could you supply shorted lengths of this tube?

      Ian
      https://somei3deas.wordpress.com/
      https://www.youtube.com/@deckingman

      Zatsitundefined 2 Replies Last reply Reply Quote 0
      • Zatsitundefined
        Zatsit @deckingman
        last edited by

        @deckingman
        Yes, all accessories, including this adapter for Hot-end watercooling, are available independently of the Zatsit kit, during the campaign on Kickstarter, and then on the online shop that will follow.

        Take a look at the Kickstarter page, it says it all!

        To manufacture this adapter, I use a specially modified small lathe with a special saw to cut the tube straight, and without blurr.

        Creator of Zatsit, the delta printer with none assembly

        1 Reply Last reply Reply Quote 0
        • Zatsitundefined
          Zatsit @deckingman
          last edited by

          @deckingman said in Zatsit printer:

          could you supply shorted lengths of this tube

          Probably.... What do you have in mind?

          Creator of Zatsit, the delta printer with none assembly

          deckingmanundefined 1 Reply Last reply Reply Quote 0
          • deckingmanundefined
            deckingman @Zatsit
            last edited by

            @zatsit said in Zatsit printer:

            @deckingman said in Zatsit printer:

            could you supply shorted lengths of this tube

            Probably.... What do you have in mind?

            I'd rather not say at this time. As this is getting way off topic, is it OK if I PM you?

            Ian
            https://somei3deas.wordpress.com/
            https://www.youtube.com/@deckingman

            Zatsitundefined 1 Reply Last reply Reply Quote 0
            • Zatsitundefined
              Zatsit @deckingman
              last edited by

              @deckingman
              Yes, of course.

              Creator of Zatsit, the delta printer with none assembly

              1 Reply Last reply Reply Quote 0
              • RCarlyleundefined
                RCarlyle
                last edited by

                Now I am imagining very interesting uses for the tube... hmmm... 🙂

                Zatsitundefined 1 Reply Last reply Reply Quote 0
                • Zatsitundefined
                  Zatsit @RCarlyle
                  last edited by

                  @rcarlyle
                  Yes, this small stainless steel tube, thus cooled, opens up a whole bunch of possibilities, which I am currently developing, and which I hope to be able to offer after Kickstarter.

                  1 - The volume of the Hot End can be divided by 5, and the weight reduced by 3, by directly integrating a miniature nozzle at the bottom of the tube. It is the tube+nozzle assembly that would become interchangeable, rather than the nozzle only.

                  2 - These miniaturized hot-ends make it possible to have a very light extrusion head, of the Direct/remote type, with two or four independent extrusion channels, but with a single drive motor, in the Flystruder position. I have already made a single-track version, which works extremely well.

                  Delta printers have great qualities, but they were generally limited by their single-channel Bowden tube. With 4 printable materials, you can imagine the possibilities!

                  Creator of Zatsit, the delta printer with none assembly

                  1 Reply Last reply Reply Quote 0
                  • fmaundefined
                    fma
                    last edited by

                    Congratulation for the successful campaign!

                    Frédéric

                    1 Reply Last reply Reply Quote 0
                    • keyz182undefined
                      keyz182
                      last edited by

                      @Zatsit it would be cool if you could get an example config for the Duet out when you start shipping, so it can be added to https://configurator.reprapfirmware.org

                      Would make it a lot faster for us to get up and running with a known good config!

                      I just need to sell my CNC laser now so my wife isn't so mad when she hears I've got to pay for yet another successful Kickstarter 😮

                      3/3 Kickstarters backed and delivered so far, got my hopes up that this makes 4/4!

                      Zatsitundefined 1 Reply Last reply Reply Quote 0
                      • Zatsitundefined
                        Zatsit @keyz182
                        last edited by

                        @keyz182
                        Just after the end of the KS campaign, two new pages will appear on my website www.zatsit.fr : STORE and DOWNLOADS.

                        You will be able to download the configurations for the different systems I was able to try, including of course Duet WiFi.

                        Creator of Zatsit, the delta printer with none assembly

                        1 Reply Last reply Reply Quote 1
                        • Zatsitundefined
                          Zatsit @T3P3Tony
                          last edited by

                          @t3p3tony
                          Many thanks to all my backers, who allowed Zatsit to be born!

                          Creator of Zatsit, the delta printer with none assembly

                          1 Reply Last reply Reply Quote 3
                          • First post
                            Last post
                          Unless otherwise noted, all forum content is licensed under CC-BY-SA