I should add that i need a total of about 335W:
-
My new bed heater is rated at 200w
-
The stepper motors require about 90W
-
My extruder is rated at 30W
-
I have 3 fans, and according to the "Choosing the power supply" guide, i'm allowing about 3W per fan.
-
And finally, 2W for the Duet Wifi 2.
As Veti said above, the two CPU connectors on the PSU are possibly rated at 75W each. If I were to use all 4 power wires from these, wouldn't I still need 185W of power? At that point, that would be a lot of wires going into the Duet, so it confuses / concerces me. Would that be correct?
If that is the case, how can I go about finding the required power? I'm unsure how much power each wire provides.