@zivo said in Change axis order in DWC:
@dc42 y es, thats definitly the order
OK, so DWC is displaying them in the order they are created. So you need to create them in the order that you want them displayed.
Note this paragraph in the description of M584 on the wiki:
If you create more than one axis in a M584 command, the axes are created in the order UVWABCD regardless of the order of the parameters in the M584 command. This affects which axes will be hidden if you use the M584 P parameter to hide axes. For example, M584 C5 U6 creates axes U and C in that order, so M584 P4 would hide the C axis, not the U axis. If you want to create the axes in the order C then U (so that M584 P4 hides the U axis), use two M584 commands: M584 C5 followed by M584 U6.
