Connecting to NAS
-
Is it possible to connect to a NAS for the purpose of getting access to stl files ?
-
the duet2 does not offer any functionality like that.
on the upcomming duet3 that should be possible.
-
@ram You can upload files using the web interface. So if you have stl files on a NAS then the simplest thing to do would be to create a share on the NAS to those files. Or you could add a network location on a PC which would treat that share as another drive and access the stl files that way.
-
@ram said in Connecting to NAS:
Is it possible to connect to a NAS for the purpose of getting access to stl files ?
What is the purpose of having access to STL files in Duet?
Duet can't do anything with STL files -
@dragonn said in Connecting to NAS:
@ram said in Connecting to NAS:
Is it possible to connect to a NAS for the purpose of getting access to stl files ?
What is the purpose of having access to STL files in Duet?
Duet can't do anything with STL filesWell spotted - I missed that
.Let's assume he meant gcode files...........
-
@deckingman yes sorry I did mean GCode files and thanks for the answer
-
@ram yes you can push files to the Duet but it can't go out and "pull" them (at least with Duet 2). Duet 3 OTOH will allow for a plugin to be written on the SBC that does that.