diy panel due

poohzaza

hi after tinker around with the duet i have add a raspberry pi to stream a cam trough octoprint
make me think that i have a raspberry pi touch display so i wonder can i make a better panel due with bigger display than panel due I7 do any one have a idea or know how to help

Veti

you could just display the dwc in a browser window on the pi display.

dc42

@poohzaza said in diy panel due:

hi after tinker around with the duet i have add a raspberry pi to stream a cam trough octoprint
make me think that i have a raspberry pi touch display so i wonder can i make a better panel due with bigger display than panel due I7 do any one have a idea or know how to help

Yes you could do that; but it might be easier to run Duet Web Control on the Pi.

poohzaza

@dc42 hi dose the duet web control support touch screen display and cam stream

Phaedrux

@poohzaza said in diy panel due:

@dc42 hi dose the duet web control support touch screen display and cam stream

Yes.

https://duet3d.dozuki.com/Wiki/Duet_Web_Control_Manual

poohzaza

how to conect duet 2 wifi to raspberry and run duet web interface

Phaedrux

The Duet 2 Wifi doesn't connect to a raspberry pi natively. The web interface runs on the Duet itself. It's already on there, you just connect to it.

https://duet3d.dozuki.com/Wiki/Step_by_step_guide

It is possible to use a raspberry pi running octoprint and connecting to the Duet via USB allowing the octopi to completely control printing, but that isn't recommended for a few reasons. You lose a lot of the nice features of the Duet and printing over USB is prone to issues.

poohzaza

@Phaedrux said in diy panel due:

y_step_guide

in a browser rigth

Phaedrux

Yes, you connect the Duet to the network and then connect to the Duet through its ip address in a browser.

poohzaza

i want to connect by panel due port and have a direct connection via a wire in serial what should i do

Danal

@poohzaza said in diy panel due:

i want to connect by panel due port and have a direct connection via a wire in serial what should i do

Buy a PanelDue, or create/write the equivalent.

The physical port is 3.3V TTL Async Serial. The data that flows over it is G and M codes, and JSON responses. Easy.