Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Failed to add SSID to remember list

    Scheduled Pinned Locked Moved
    Firmware installation
    5
    14
    3.8k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • hussainsail2002undefined
      hussainsail2002
      last edited by hussainsail2002

      The M115 command gives the following message:

      FIRMWARE_NAME: RepRapFirmware for Duet 2 WiFi/Ethernet FIRMWARE_VERSION: 2.03beta3 ELECTRONICS: Duet WiFi 1.02 or later FIRMWARE_DATE: 2019-03-25b6<LF>ok<LF>

      The M997 S1 gives following message:

      Trying to connect at 230400 baud: failed<LF>Trying to connect at 115200 baud: failed<LF>Trying to connect at 74880 baud: failed<LF>Trying to connect at 9600 baud: failed<LF>Error: Installation failed due to comm write error<LF>ok<LF>

      I checked the bits per second under the serial port section it is given as 9600 (in YAT) which I am assuming is the baud rate.

      Not sure why it dint connect with the 9600 baud rate ?

      Went ahead with the other commands anyways , but no luck.

      dc42undefined 1 Reply Last reply Reply Quote 0
      • hussainsail2002undefined
        hussainsail2002
        last edited by

        not able to get the firmware installed, any thing else I can do ??

        1 Reply Last reply Reply Quote 0
        • hussainsail2002undefined
          hussainsail2002 @dc42
          last edited by

          @dc42
          anything else that I can do ??

          1 Reply Last reply Reply Quote 0
          • Phaedruxundefined
            Phaedrux Moderator
            last edited by

            It looks like you have the main firmware installed. Have you updated the wifi server firmware as well?

            Z-Bot CoreXY Build | Thingiverse Profile

            hussainsail2002undefined 1 Reply Last reply Reply Quote 0
            • hussainsail2002undefined
              hussainsail2002 @Phaedrux
              last edited by

              @phaedrux

              I downloaded the duetwifiserver.bin file and replaced it with the one in the sys folder

              Is there anything else that I have to do to install ?

              1 Reply Last reply Reply Quote 0
              • dc42undefined
                dc42 administrators @hussainsail2002
                last edited by

                @hussainsail2002 said in Failed to add SSID to remember list:

                The M115 command gives the following message:

                FIRMWARE_NAME: RepRapFirmware for Duet 2 WiFi/Ethernet FIRMWARE_VERSION: 2.03beta3 ELECTRONICS: Duet WiFi 1.02 or later FIRMWARE_DATE: 2019-03-25b6<LF>ok<LF>

                The M997 S1 gives following message:

                Trying to connect at 230400 baud: failed<LF>Trying to connect at 115200 baud: failed<LF>Trying to connect at 74880 baud: failed<LF>Trying to connect at 9600 baud: failed<LF>Error: Installation failed due to comm write error<LF>ok<LF>

                I checked the bits per second under the serial port section it is given as 9600 (in YAT) which I am assuming is the baud rate.

                Not sure why it dint connect with the 9600 baud rate ?

                Went ahead with the other commands anyways , but no luck.

                Looks like the WiFi module has failed. Please ask your supplier to replace your Duet.

                Duet WiFi hardware designer and firmware engineer
                Please do not ask me for Duet support via PM or email, use the forum
                http://www.escher3d.com, https://miscsolutions.wordpress.com

                hussainsail2002undefined 1 Reply Last reply Reply Quote 0
                • hussainsail2002undefined
                  hussainsail2002 @dc42
                  last edited by

                  @dc42
                  My supplier is e3d ,

                  can I take a screen shot of this conversion ?

                  dc42undefined 1 Reply Last reply Reply Quote 0
                  • dc42undefined
                    dc42 administrators @hussainsail2002
                    last edited by

                    @hussainsail2002 said in Failed to add SSID to remember list:

                    @dc42
                    My supplier is e3d ,

                    can I take a screen shot of this conversion ?

                    Yes, or if you are emailing them, include a link to this thread

                    Duet WiFi hardware designer and firmware engineer
                    Please do not ask me for Duet support via PM or email, use the forum
                    http://www.escher3d.com, https://miscsolutions.wordpress.com

                    1 Reply Last reply Reply Quote 0
                    • supermoto7undefined
                      supermoto7 @dc42
                      last edited by

                      @dc42 I had the same problem as OP and this fixed it first try. Thank you, and please consider adding this to the getting connected guide. Cheers!

                      1 Reply Last reply Reply Quote 0
                      • FelixHundefined
                        FelixH
                        last edited by

                        A friend of mine has the same problem and has some wifi modules lying around. Would it solve the problem replacing the module or it has nothing to do with it?

                        dc42undefined 1 Reply Last reply Reply Quote 0
                        • dc42undefined
                          dc42 administrators @FelixH
                          last edited by

                          @FelixH said in Failed to add SSID to remember list:

                          A friend of mine has the same problem and has some wifi modules lying around. Would it solve the problem replacing the module or it has nothing to do with it?

                          Probably nothing to do with it. Check that you are running recent main firmware (2.05 or 3.0 or 3.01beta) and WiFi module firmware (1.23).

                          Duet WiFi hardware designer and firmware engineer
                          Please do not ask me for Duet support via PM or email, use the forum
                          http://www.escher3d.com, https://miscsolutions.wordpress.com

                          1 Reply Last reply Reply Quote 0
                          • FelixHundefined
                            FelixH
                            last edited by

                            well, apparently he solved it by resoldering the connections of the wifi module... I wouldn't have done it, bu he's braver... thanks

                            1 Reply Last reply Reply Quote 0
                            • First post
                              Last post
                            Unless otherwise noted, all forum content is licensed under CC-BY-SA