Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Custom Splash Screen

    Scheduled Pinned Locked Moved
    PanelDue
    paneldue custom
    4
    6
    510
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • DDDundefined
      DDD
      last edited by

      Dear PanelDue enthusiasts,

      I tried to add a custom splash screen to my PanelDue 7i, ER-TFTM070A1-4 V2.0 board with ATSAM4S4B chip, without success.

      After following these instructions:

      https://miscsolutions.wordpress.com/paneldue/

      and these:

      https://www.instructables.com/id/How-to-Add-a-Splash-Screen-to-PanelDue/

      The logo.bin file was concatenated to the PanelDue-5.0i-7.0i-nologo.bin (release 1.23.2). The new firmware worked but no logo appeared.

      The v2 firmwares don't work with my PanelDue.

      What would you think am I doing wrong?

      I suspected the image would be to blame, but not sure if I have the right one.

      Any help would be appreciated.

      ![0_1583229976656_bmt.bmp](Uploading 100%)

      dc42undefined 1 Reply Last reply Reply Quote 0
      • Phaedruxundefined
        Phaedrux Moderator
        last edited by

        Your image upload failed.

        Did you get any errors during the process?

        Z-Bot CoreXY Build | Thingiverse Profile

        DDDundefined 1 Reply Last reply Reply Quote 0
        • DDDundefined
          DDD @Phaedrux
          last edited by DDD

          @Phaedrux no errors at any step.

          Image is 800x400 px inkscape exported png, saved as 24bit bmp with MS Paint (Windows 10). Image bin is 20KB, after concatenation firmware is 150KB.

          Flashed successfully everytime using the i7 file. V2 doesn't work on my screen.

          I'll try to upload the file again

          1 Reply Last reply Reply Quote 0
          • dc42undefined
            dc42 administrators @DDD
            last edited by

            @DDD said in Custom Splash Screen:

            I tried to add a custom splash screen to my PanelDue 7i, ER-TFTM070A1-4 V2.0 board with ATSAM4S4B chip, without success.

            That's a contradiction. Version 2 PanelDue boards have ATSAM3S2B or ATSAM3S4B. Version 3 boards have ATSAM4S4B.

            Duet WiFi hardware designer and firmware engineer
            Please do not ask me for Duet support via PM or email, use the forum
            http://www.escher3d.com, https://miscsolutions.wordpress.com

            DDDundefined 1 Reply Last reply Reply Quote 0
            • DDDundefined
              DDD @dc42
              last edited by

              @dc42 that's the info on the board

              1 Reply Last reply Reply Quote 0
              • A Former User?
                A Former User
                last edited by

                @DDD said in Custom Splash Screen:

                that's the info on the board

                as in silk screen or also the marking on the cpu? does bossa agree as well?

                1 Reply Last reply Reply Quote 0
                • First post
                  Last post
                Unless otherwise noted, all forum content is licensed under CC-BY-SA