Duet Wifi + Raspberry Octoprint Power Problem
-
Hi
I connected today my duet to my octoprint to use my Palette in connected mode but if the printer is off and the raspberry is on I see the bltouch on and the paneldue blinking, why?
How can I fix this problem? -
https://lb.raspberrypi.org/forums/viewtopic.php?t=162539
see if that leads you anywhere. I honestly don't recall if it worked or not when i tried.
-
I tried the command but it disconnect all ports and i'm not able to see devices.
-
Ah, more than one USB device connected to the Pi? Yeah, I do seem to recall there being an issue with loosing 5v on all the ports; if it was just the Duet then it should have worked better.
-
Which firmware are you running? if it supports marlin mode on the paneldue port you might be able to use that instead of usb between the pi and the duet.
-
@bearer
On duet I have 2.0.7, and on palette the latest -
@bearer Yes I use octoprint only to print in connected mode with palette2, on my octoprint I have duet and palette connected
-
@Dav said in Duet Wifi + Raspberry Octoprint Power Problem:
Yes I use octoprint only to print in connected mode with palette2
You might find thats not immediately obvious to everyone how its all connected; maybe adding a diagram or picture will illicit more input from the rest of the clever people here.
