Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    RRF 3.01-RC12, DWC 2.1.7 and DSF 2.2.0 available

    Scheduled Pinned Locked Moved
    Beta Firmware
    6
    9
    574
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • dc42undefined
      dc42 administrators
      last edited by

      On behalf of the Duet3D team I am pleased to announce the release of this new firmware/software bundle. This fixes bugs that have been reported in the previous bundle. As usual, please read the release notes before installing this release.

      Users of Duet 3 + Raspberry Pi can upgrade to this bundle from the unstable package feed using sudo apt-get update and sudo apt get upgrade as usual. All other Duet users can get it from https://github.com/dc42/RepRapFirmware/releases/tag/3.01-RC12.

      RRF 3.01-RC12 release notes: https://github.com/dc42/RepRapFirmware/blob/v3-dev/WHATS_NEW_RRF3.md
      DWC 2.1.7 release notes: https://github.com/chrishamm/DuetWebControl/blob/master/WHATS_NEW.md
      DSF 2.2.0 release notes: https://github.com/chrishamm/DuetSoftwareFramework/blob/dev/WHATS_NEW.md

      If you find any issues with this release, please start a new thread for each one (unless there is already a thread devoted to that issue) and link to that thread in a 1-line post in this thread. Please do not post the details of issues you find with these releases in this thread.

      We were really hoping that we wouldn't need another 3.01-RC release and would go straight to the 3.01 stable release after RC11, but code changes to fix bugs were more invasive than we hoped.

      Duet WiFi hardware designer and firmware engineer
      Please do not ask me for Duet support via PM or email, use the forum
      http://www.escher3d.com, https://miscsolutions.wordpress.com

      1 Reply Last reply Reply Quote 2
      • Danalundefined
        Danal
        last edited by Danal

        Installed cleanly via 'apt' on top of RC11. Including auto upgrade of Duet 3 6HC firmware, which now shows RC12.

        M997 of 3HC showed RC11 after, so I'm assuming there was no RC12 for expansion; same w/tool boards.

        May I offer that distributing an "even" set of binaries for all board types, including expansion/tool even when there are no changes for expansion/tool would be more clear to end users. Right now, we can't know if RC11 or 12 is correct for expansion/tool. Edit: As Dave pointed out, this is very clear in the release notes.

        Delta / Kossel printer fanatic

        1 Reply Last reply Reply Quote 0
        • dc42undefined
          dc42 administrators
          last edited by dc42

          I already listed the compatible versions in the release notes. When 3.01 stable is released, all the numbers will be in sync.

          PS - I've just added a note on the release page saying which files haven't changed.

          Duet WiFi hardware designer and firmware engineer
          Please do not ask me for Duet support via PM or email, use the forum
          http://www.escher3d.com, https://miscsolutions.wordpress.com

          Danalundefined 1 Reply Last reply Reply Quote 0
          • Danalundefined
            Danal @dc42
            last edited by

            @dc42 said in RRF 3.01-RC12, DWC 2.1.7 and DSF 2.2.0 available:

            I already listed the compatible versions in the release notes. When 3.01 stable is released, all the numbers will be in sync.

            Got it, thank you for the quick response.

            Delta / Kossel printer fanatic

            1 Reply Last reply Reply Quote 0
            • arhiundefined
              arhi
              last edited by

              upload of the Duet2CombinedIAP.bin - finally works ok 🙂

              1 Reply Last reply Reply Quote 0
              • garyd9undefined
                garyd9
                last edited by garyd9

                DWC 2.1.7 - Bug (define area for delta mesh compensation)

                https://forum.duet3d.com/topic/16178/dwc-2-1-7-bug-define-area-for-delta-mesh-compensation

                "I'm not saying that you are wrong - I'm just trying to fit it into my real world simulated experience."

                1 Reply Last reply Reply Quote 0
                • techildundefined
                  techild
                  last edited by

                  M291 S2 blocking does not work inside a conditional IF statement on Duet 2 boards.

                  https://forum.duet3d.com/topic/16180/3-01rc12-on-ethernet-duex5-m291-s2-nonblocking-inside-if-loop

                  techildundefined 1 Reply Last reply Reply Quote 0
                  • techildundefined
                    techild @techild
                    last edited by techild

                    @techild said in RRF 3.01-RC12, DWC 2.1.7 and DSF 2.2.0 available:

                    M291 S2 blocking does not work inside a conditional IF statement on Duet 2 boards.

                    https://forum.duet3d.com/topic/16180/3-01rc12-on-ethernet-duex5-m291-s2-nonblocking-inside-if-loop

                    Resolved. Thanks!

                    1 Reply Last reply Reply Quote 0
                    • 4latheundefined
                      4lathe
                      last edited by

                      Bed Heater no longer Visible after Updating to 3.01-rc12

                      https://forum.duet3d.com/topic/16204/bed-heater-no-longer-visible-after-updating-to-3-01-rc12

                      1 Reply Last reply Reply Quote 0
                      • First post
                        Last post
                      Unless otherwise noted, all forum content is licensed under CC-BY-SA