Prusa setup for a total dummy

[snake1966]

Hi

In the high expectation of receiving my Duet Wifi and 5" panel, can somebody please indicate the path to some sort of guide to setup the system for a prusa i3 type printer, I am a total noob and dummy on this, so any and all help is most appreciated.

Thanks to all in advance and best regards.

[whosrdaddy]

The wiki on this site is quite complete and provides a good starting point.
On the SD card you can find an example configuration for an i3 (cartesian) printer type, more info can be found here: https://duet3d.com/wiki/SD_card_folder_structure

[darookee]

I converted my Wanhao Duplicator i3 and wrote a small guide you can find here: https://github.com/darookee/wanhaoi3-duetwifi

[T3P3Tony]

Darokee, thanks for the writeup. I have added a link to it under the tutorial section of the wiki:
https://duet3d.com/wiki/Tutorials#Setup