3.1.1 doesn't disable hot-end heater while bl-touch probing
-
seems like a regression. did the configuration params change?
-
This post is deleted! -
@JoergS5 That's a bit harsh if I may say so. The OPs title states the problem concisely, and in his post, he asks if configuration parameters need to be changed. I don't see anything in that which constitutes a rant of any sort.
-
@deckingman ok, if this appear as so, I remove it and say sorry to gnydick
Thank you Ian for telling me!
-
M558 B1.
-
this is my line
M558 P9 C"zprobe.in+zprobe.mod" H1.5 F120 T9000 R0.2 A5 B1 ; set Z probe type to bltouch and the dive height + speeds
-
@gnydick said in 3.1.1 doesn't disable hot-end heater while bl-touch probing:
+zprobe.mod
Remove that from the C param, added by the configurator but shouldn't be.
If you send M558 P9 in the console, what does it reply back?
Do you have any other M558 commands elsewhere? -
@Phaedrux thanks, I'll fix that as well as see what that command outputs. There are no other M558