USB Drivers
-
Yeah, great advise! Thanks. It works. But now back to setting my Duet wifi to a fixed adress. M552 S1 Px.x.x.x does not work...
-
@hblz if possible, I would suggest you look at assigning a fixed IP from the router rather than the duet. That way there's no chance of another device getting assigned the same IP
-
@jay_s_uk If you know your own network segment, and assign static IP on the ESP, you shave around 1-2 sec in boot time.
-
@hblz said in USB Drivers:
M552 S1 Px.x.x.x does not work.
i think it should, been awhile since i tried it. the other option is to store it with m587 Ix.x.x.x
you may want to forget the old entry first for good measure.
(also, what he said
) -
@dc42 I still can't get the USB driver working. Is there a way to clean the drivers up? Is there a difference between versions of the Duets wifi ? I would like to be able to connect the duet3d to my simplify 3d since this is sometimes easier and quicker then sending files to the duet.
-
Do you see anything show up when the duet is connected if you go to view > show hidden devices?
-
@Phaedrux Yes, it says 'unknown USB, device descriptor failed' (translated from dutch)
-
Can you delete that device and then replug the duet into a new port?
Do you have a powered usb hub to try with as well? -
@Phaedrux Unfortunatedly deleting does not change a thing. Different cable doesnt help either.
-
Does this work over Wifi now as well? I know originally it was said that Windows 10 and 3D printers was around USB, but wondered if this had changed?.
-
@M1sterd said in USB Drivers:
Does this work over Wifi now as well? I know originally it was said that Windows 10 and 3D printers was around USB, but wondered if this had changed?.
I'm not exactly sure what you're asking here.
