@dc42 Thanks for letting me know!

Hi!
First time making a post, so hopefully I do it correctly.
I'm using a Duet2Wifi on a 3D printer that extrudes clay like substances. For that reason I like to see at what speed the extruder is turning. I'm not a programmer at all, so I don't know anything about writing custom code.
From what I've seen, there isn't a G-Code command or a function on the DWC or on the PanelDue that directly tells you the speed of the extruder. If there is, please tell me.
I've thought of making a macro with M114 commands and some math to determine the speed within a certain timeframe, but my knowledge doesn't reach that far.

Has anyone tried this before and can share their knowledge?
Thanks

@Phaedrux Unfortunatedly deleting does not change a thing. Different cable doesnt help either.

@Phaedrux Yes, it says 'unknown USB, device descriptor failed' (translated from dutch)

@dc42 I still can't get the USB driver working. Is there a way to clean the drivers up? Is there a difference between versions of the Duets wifi ? I would like to be able to connect the duet3d to my simplify 3d since this is sometimes easier and quicker then sending files to the duet.

Yeah, great advise! Thanks. It works. But now back to setting my Duet wifi to a fixed adress. M552 S1 Px.x.x.x does not work...

This is a fast response! Install worked but Unfortunatedly the device is still not connecting.
Is there a way to reset the IP adres so I can connect again through wifi?
I need it to get connected to my duet because there went something wrong with setting the duet to a fixed ip adres with the M552 in the config.g

@dc42 I can't get the driver working. Is the driver Windows 10 ready? It doesn't say in the info.
I really need it to get connected to my duet because there went something wrong with setting the duet to a fixed ip adres with the M552 in the config.g. Thanks for helping out