Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Newbie: New Install on Ender 5 Plus---Willing to PAY$$$

    Scheduled Pinned Locked Moved
    Tuning and tweaking
    6
    141
    7.2k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • shattyundefined
      shatty
      last edited by

      ; homeall.g
      ; called to home all axes
      ;
      ; generated by RepRapFirmware Configuration Tool v3.1.4 on Sun Nov 15 2020 03:22:47 GMT-0500 (Eastern Standard Time)
      G91 ; relative positioning
      G1 H2 Z5 F6000 ; lift Z relative to current position
      G1 H1 X-355 Y-355 F1800 ; move quickly to X and Y axis endstops and stop there (first pass)
      G1 H2 X5 Y5 F6000 ; go back a few mm
      G1 H1 X-355 Y-355 F360 ; move slowly to X and Y axis endstops once more (second pass)
      G90 ; absolute positioning
      G1 X50 Y50 F600 ; go to first bed probe point and home Z
      G30 ; home Z by probing the bed

      ; Uncomment the following lines to lift Z after probing
      ;G91 ; relative positioning
      ;G1 Z5 F100 ; lift Z relative to current position
      ;G90 ; absolute positioning

      ; Configuration file for Duet WiFi (firmware version 3)
      ; executed by the firmware on start-up
      ;
      ; generated by RepRapFirmware Configuration Tool v3.1.4 on Sun Nov 15 2020 03:22:47 GMT-0500 (Eastern Standard Time)

      ; General preferences
      G90 ; send absolute coordinates...
      M83 ; ...but relative extruder moves
      M550 P"E5Plus" ; set printer name

      ; Network
      M551 P"xxxx" ; set password
      M552 S1 ; enable network
      M586 P0 S1 ; enable HTTP
      M586 P1 S0 ; disable FTP
      M586 P2 S0 ; disable Telnet

      ; Drives
      M569 P0 S1 ; physical drive 0 goes forwards
      M569 P1 S1 ; physical drive 1 goes forwards
      M569 P2 S0 ; physical drive 2 goes backwards
      M569 P3 S0 ; physical drive 3 goes backwards
      M584 X0 Y1 Z2 E3 ; set drive mapping
      M350 X16 Y16 Z16 E16 I1 ; configure microstepping with interpolation
      M92 X80.00 Y80.00 Z800.00 E412.60 ; set steps per mm
      M566 X1200.00 Y1200.00 Z60.00 E300.00 ; set maximum instantaneous speed changes (mm/min)
      M203 X9000.00 Y9000.00 Z1200.00 E6000.00 ; set maximum speeds (mm/min)
      M201 X500.00 Y500.00 Z100.00 E5000.00 ; set accelerations (mm/s^2)
      M906 X800 Y800 Z1400 E1000 I50 ; set motor currents (mA) and motor idle factor in per cent
      M84 S30 ; Set idle timeout

      ; Axis Limits
      M208 X0 Y0 Z0 S1 ; set axis minima
      M208 X350 Y350 Z400 S0 ; set axis maxima

      ; Endstops
      M574 X1 S1 P"xstop" ; configure active-high endstop for low end on X via pin xstop
      M574 Y1 S1 P"ystop" ; configure active-high endstop for low end on Y via pin ystop
      M574 Z1 S2 ; configure Z-probe endstop for low end on Z

      ; Z-Probe
      M950 S0 C"exp.heater3" ; create servo pin 0 for BLTouch
      M558 P9 C"^zprobe.in" H5 F600 T6000 ; set Z probe type to bltouch and the dive height + speeds
      G31 P500 X16.3 Y14 Z1.7 ; set Z probe trigger value, offset and trigger height
      M557 X15:190 Y15:190 S20 ; define mesh grid

      ; Heaters
      M308 S0 P"bedtemp" Y"thermistor" T100000 B4092 ; configure sensor 0 as thermistor on pin bedtemp
      M950 H0 C"bedheat" T0 ; create bed heater output on bedheat and map it to sensor 0
      M307 H0 B1 S1.00 ; enable bang-bang mode for the bed heater and set PWM limit
      M140 H0 ; map heated bed to heater 0
      M143 H0 S110 ; set temperature limit for heater 0 to 110C
      M308 S1 P"e0temp" Y"thermistor" T100000 B4092 ; configure sensor 1 as thermistor on pin e0temp
      M950 H1 C"e0heat" T1 ; create nozzle heater output on e0heat and map it to sensor 1
      M307 H1 B0 S1.00 ; disable bang-bang mode for heater and set PWM limit
      M143 H1 S280 ; 280 deg max on hot end

      ; Fans
      M950 F0 C"fan0" Q500 ; create fan 0 on pin fan0 and set its frequency
      M106 P0 S1 H1 ; set fan 0 value. Thermostatic control is turned off
      M950 F1 C"fan1" Q500 ; create fan 1 on pin fan1 and set its frequency
      M106 P1 S1 H1 T45 ; set fan 1 value. Thermostatic control is turned on

      ; Tools
      M563 P0 D0 H1 F0 ; define tool 0
      G10 P0 X0 Y0 Z0 ; set tool 0 axis offsets
      G10 P0 R0 S0 ; set initial tool 0 active and standby temperatures to 0C

      ; Custom settings are not defined

      ; Miscellaneous
      M575 P1 S1 B57600 ; enable support for PanelDue

      1 Reply Last reply Reply Quote 0
      • Vetiundefined
        Veti @shatty
        last edited by Veti

        @shatty said in Newbie: New Install on Ender 5 Plus---Willing to PAY$$:

        . Its random in which direction it goes to home and it just slams at the end of each axis.

        i have never heard of this happening.

        let me get this straight.
        you home your printer. it moves to the right?
        you restart the printer it moves to the left?

        post the output of M119 when no endstop is pressed.
        post the output of M119 when only the enstop for the x axis is pressed

        shattyundefined 1 Reply Last reply Reply Quote 0
        • shattyundefined
          shatty @Veti
          last edited by

          @Veti
          When I turn it on, nothing moves unless i press the home button. There is no telling which direction it will go if i center the extruder in the middle of the area. Where am I supposed to set the hotend before I turn on the printer?

          Vetiundefined 1 Reply Last reply Reply Quote 0
          • Vetiundefined
            Veti @shatty
            last edited by

            @shatty
            please test the stepper motor direction using this
            https://duet3d.dozuki.com/Wiki/Choosing_and_connecting_stepper_motors#Section_Checking_connected_stepper_motors

            report for x y and z

            1 Reply Last reply Reply Quote 0
            • shattyundefined
              shatty
              last edited by shatty

              Heres a video of what it does....

              https://drive.google.com/file/d/1IeBbFe_YLu9XSz0GbuNmigxwDfcq57Ay/view?usp=sharing

              1 Reply Last reply Reply Quote 0
              • Vetiundefined
                Veti
                last edited by

                please do the testing from the webui to rule out a bad touch screen connection.

                shattyundefined 1 Reply Last reply Reply Quote 0
                • Vetiundefined
                  Veti
                  last edited by

                  btw what is that strange sound at the start of the homing?

                  shattyundefined 1 Reply Last reply Reply Quote 0
                  • shattyundefined
                    shatty @Veti
                    last edited by

                    @Veti said in Newbie: New Install on Ender 5 Plus---Willing to PAY$$:

                    please do the testing from the webui to rule out a bad touch screen connection.

                    TS is fine.

                    Anyways....hitting any positive value will move each toward the endstop switch...The Z is not right..Looks like they are fighting each other

                    Vetiundefined 2 Replies Last reply Reply Quote 0
                    • shattyundefined
                      shatty @Veti
                      last edited by

                      @Veti said in Newbie: New Install on Ender 5 Plus---Willing to PAY$$:

                      btw what is that strange sound at the start of the homing?

                      The Z axis motors are fighting each other.

                      Vetiundefined 1 Reply Last reply Reply Quote 0
                      • Vetiundefined
                        Veti @shatty
                        last edited by

                        @shatty said in Newbie: New Install on Ender 5 Plus---Willing to PAY$$:

                        Anyways....hitting any positive value will move each toward the endstop switch...

                        that would indicate that your motors are turning in the wrong direction.

                        shattyundefined 1 Reply Last reply Reply Quote 0
                        • shattyundefined
                          shatty @Veti
                          last edited by

                          @Veti
                          OK Let me fix that.

                          1 Reply Last reply Reply Quote 0
                          • Vetiundefined
                            Veti @shatty
                            last edited by

                            @shatty said in Newbie: New Install on Ender 5 Plus---Willing to PAY$$:

                            The Z axis motors are fighting each other.

                            that means on of your motors is wired in the opposite direction

                            1 Reply Last reply Reply Quote 0
                            • Vetiundefined
                              Veti @shatty
                              last edited by

                              @shatty said in Newbie: New Install on Ender 5 Plus---Willing to PAY$$:

                              TS is fine.

                              i beg to differ. The bad command 55 at the end is an indication.

                              shattyundefined 1 Reply Last reply Reply Quote 0
                              • shattyundefined
                                shatty @Veti
                                last edited by

                                @Veti Thats because I hit stop

                                Not the motors are moving away from endstops with hitting the positive values. Z still fighting each other. They are in series config because there are 2 on 1 driver

                                Vetiundefined 1 Reply Last reply Reply Quote 0
                                • shattyundefined
                                  shatty
                                  last edited by

                                  Paneldue5i is connected with ribbon cable only. How can it be wrong?

                                  1 Reply Last reply Reply Quote 0
                                  • Vetiundefined
                                    Veti @shatty
                                    last edited by Veti

                                    @shatty said in Newbie: New Install on Ender 5 Plus---Willing to PAY$$:

                                    Z still fighting each other.

                                    that mean you have to reverse the wiring of one of your stepper motors

                                    shattyundefined 1 Reply Last reply Reply Quote 0
                                    • shattyundefined
                                      shatty @Veti
                                      last edited by

                                      @Veti
                                      OK. TY. Hopefully I can gain progress now.

                                      shattyundefined 1 Reply Last reply Reply Quote 0
                                      • shattyundefined
                                        shatty @shatty
                                        last edited by

                                        @shatty

                                        Z wired right. Only thing is...small little problem....THE WIRE IS CUT!!! THRU 3 OF THE 4 WIRES ON ONE OF THE Z STEPPERS!!!!!

                                        1 Reply Last reply Reply Quote 0
                                        • shattyundefined
                                          shatty
                                          last edited by shatty

                                          Luckily MicroCenter doesnt sell them. F me. They sell a bunch of Creality replacement parts. 10 min from me. Amazon it is. Ugh

                                          I could repair it but its a new machine and i dont want to.

                                          Vetiundefined 1 Reply Last reply Reply Quote 0
                                          • Vetiundefined
                                            Veti @shatty
                                            last edited by

                                            @shatty

                                            where is the wire cut?

                                            shattyundefined 1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA