Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Duet 2 Wifi rebooting/crashing during print

    Scheduled Pinned Locked Moved Solved
    Beta Firmware
    crash firmware hardware
    7
    41
    2.2k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Phaedruxundefined
      Phaedrux Moderator
      last edited by

      What's in the macro here:

      M98 P"0:/macros/start.g"

      Z-Bot CoreXY Build | Thingiverse Profile

      bwnanceundefined 1 Reply Last reply Reply Quote 0
      • bwnanceundefined
        bwnance @Phaedrux
        last edited by

        @Phaedrux
        I've got a little bit of a macro tree:
        start.g:

        G28
        M98 P"0:/macros/brushclean.g"
        M98 P"0:/macros/bottomhome.g"
        G29 S1 ; load height map 
        

        brushclean.g:

        G0 Z25 F12000
        M564 S0 ; disable limits
        G0 X0 Y0 Z12 F3000 ; middle of bed, z=5
        G0 X0 Y-130 ; middle of brush
        G0 Z8 ; drop nozzle slightly
        G0 X15 ; 
        G0 Y-128 X-15
        G0 Y-125 X15
        G0 Y-125 X0
        G0 Z12
        G0 X0 Y0
        M564 S1 ; enable limits again
        

        bottomhome.g:

        M106 P0 S0
        G0 Z25 F12000
        G30 
        G0 Z15 F12000
        
        1 Reply Last reply Reply Quote 0
        • bwnanceundefined
          bwnance
          last edited by

          @Phaedrux @dc42 Hey y'all, just bumping this again -- here's another crash report from today, along with the offending gcode:
          tree_new.txt

          === Diagnostics ===
          RepRapFirmware for Duet 2 WiFi/Ethernet version 3.1.1 running on Duet WiFi 1.02 or later
          Board ID: 08DJM-9178L-L2MSD-6J1FA-3S46N-KSFYP
          Used output buffers: 3 of 24 (11 max)
          === RTOS ===
          Static ram: 27980
          Dynamic ram: 93236 of which 60 recycled
          Exception stack ram used: 304
          Never used ram: 9492
          Tasks: NETWORK(ready,368) HEAT(blocked,1224) MAIN(running,1880) IDLE(ready,80)
          Owned mutexes: WiFi(NETWORK)
          === Platform ===
          Last reset 00:29:46 ago, cause: software
          Last software reset at 2020-12-14 23:54, reason: Hard fault, spinning module GCodes, available RAM 8940 bytes (slot 2)
          Software reset code 0x4063 HFSR 0x40000000 CFSR 0x00008200 ICSR 0x04427003 BFAR 0xa5a5a5a5 SP 0x2001ffbc Task MAIN
          Stack: 0040f451 0040f452 0100001f 200052f0 200052ef 20008c2c 20003d50 a5a5a5a5 ffffffed 00000000 00f00000 
          Error status: 0
          MCU temperature: min 23.4, current 28.8, max 29.5
          Supply voltage: min 23.9, current 24.1, max 24.3, under voltage events: 0, over voltage events: 0, power good: yes
          Driver 0: standstill, SG min/max not available
          Driver 1: standstill, SG min/max not available
          Driver 2: standstill, SG min/max not available
          Driver 3: standstill, SG min/max not available
          Driver 4: standstill, SG min/max not available
          Date/time: 2020-12-15 00:24:45
          Cache data hit count 2932587391
          Slowest loop: 3.44ms; fastest: 0.14ms
          I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
          === Storage ===
          Free file entries: 10
          SD card 0 detected, interface speed: 20.0MBytes/sec
          SD card longest read time 0.9ms, write time 0.0ms, max retries 0
          === Move ===
          Hiccups: 0(0), FreeDm: 169, MinFreeDm: 169, MaxWait: 0ms
          Bed compensation in use: none, comp offset 0.000
          === MainDDARing ===
          Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0  CDDA state: -1
          === AuxDDARing ===
          Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0  CDDA state: -1
          === Heat ===
          Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
          === GCodes ===
          Segments left: 0
          Movement lock held by null
          HTTP is idle in state(s) 0
          Telnet is idle in state(s) 0
          File is idle in state(s) 0
          USB is idle in state(s) 0
          Aux is idle in state(s) 0
          Trigger is idle in state(s) 0
          Queue is idle in state(s) 0
          Daemon is idle in state(s) 0
          Autopause is idle in state(s) 0
          Code queue is empty.
          === Network ===
          Slowest loop: 15.73ms; fastest: 0.00ms
          Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions
          HTTP sessions: 1 of 8
          - WiFi -
          Network state is active
          WiFi module is connected to access point 
          Failed messages: pending 0, notready 0, noresp 0
          WiFi firmware version 1.23
          WiFi MAC address dc:4f:22:6e:6c:ca
          WiFi Vcc 3.43, reset reason Unknown
          WiFi flash size 4194304, free heap 21056
          WiFi IP address 192.168.86.34
          WiFi signal strength -57dBm, reconnections 0, sleep mode modem
          Socket states: 0 0 0 0 0 0 0 0
          
          1 Reply Last reply Reply Quote 0
          • bwnanceundefined
            bwnance
            last edited by

            and another one just now, the more the merrier, i guess

            === Diagnostics ===
            RepRapFirmware for Duet 2 WiFi/Ethernet version 3.1.1 running on Duet WiFi 1.02 or later
            Board ID: 08DJM-9178L-L2MSD-6J1FA-3S46N-KSFYP
            Used output buffers: 3 of 24 (11 max)
            === RTOS ===
            Static ram: 27980
            Dynamic ram: 93236 of which 60 recycled
            Exception stack ram used: 472
            Never used ram: 9324
            Tasks: NETWORK(ready,408) HEAT(blocked,1224) MAIN(running,1840) IDLE(ready,80)
            Owned mutexes: WiFi(NETWORK)
            === Platform ===
            Last reset 00:00:37 ago, cause: software
            Last software reset at 2020-12-15 02:33, reason: Hard fault, spinning module none, available RAM 8892 bytes (slot 3)
            Software reset code 0x4071 HFSR 0x40000000 CFSR 0x00008200 ICSR 0x0441f003 BFAR 0x91200200 SP 0x2001ff8c Task NETW
            Stack: 00454e15 00454e20 6100000e 40090000 0041d011 00000000 20002860 10000000 2000b98c 00000000 200034f0 
            Error status: 0
            MCU temperature: min 24.2, current 24.8, max 25.0
            Supply voltage: min 23.9, current 24.1, max 24.3, under voltage events: 0, over voltage events: 0, power good: yes
            Driver 0: ok, SG min/max not available
            Driver 1: ok, SG min/max not available
            Driver 2: standstill, SG min/max not available
            Driver 3: standstill, SG min/max not available
            Driver 4: standstill, SG min/max not available
            Date/time: 2020-12-15 02:34:35
            Cache data hit count 58687792
            Slowest loop: 3.66ms; fastest: 0.14ms
            I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
            === Storage ===
            Free file entries: 8
            SD card 0 detected, interface speed: 20.0MBytes/sec
            SD card longest read time 1.0ms, write time 0.0ms, max retries 0
            === Move ===
            Hiccups: 0(0), FreeDm: 166, MinFreeDm: 166, MaxWait: 18624ms
            Bed compensation in use: none, comp offset 0.000
            === MainDDARing ===
            Scheduled moves: 1, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0  CDDA state: 3
            === AuxDDARing ===
            Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0  CDDA state: -1
            === Heat ===
            Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
            === GCodes ===
            Segments left: 0
            Movement lock held by HTTP
            HTTP is idle in state(s) 1 0 8, running macro
            Telnet is idle in state(s) 0
            File is idle in state(s) 0
            USB is idle in state(s) 0
            Aux is idle in state(s) 0
            Trigger is idle in state(s) 0
            Queue is idle in state(s) 0
            Daemon is idle in state(s) 0
            Autopause is idle in state(s) 0
            Code queue is empty.
            === Network ===
            Slowest loop: 15.75ms; fastest: 0.00ms
            Responder states: HTTP(2) HTTP(4) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions
            HTTP sessions: 1 of 8
            - WiFi -
            Network state is active
            WiFi module is connected to access point 
            Failed messages: pending 0, notready 0, noresp 0
            WiFi firmware version 1.23
            WiFi MAC address dc:4f:22:6e:6c:ca
            WiFi Vcc 3.43, reset reason Unknown
            WiFi flash size 4194304, free heap 21408
            WiFi IP address 192.168.86.34
            WiFi signal strength -55dBm, reconnections 0, sleep mode modem
            Socket states: 4 2 0 0 0 0 0 0
            
            1 Reply Last reply Reply Quote 0
            • markzundefined
              markz
              last edited by

              Since no one has jumped in here, my usual opinion when I see something like this is that (assuming the board is ok) it's either a power supply issue or a voltage noise issue.

              How much power does your heated bed use? Is it enough to impact the power supply?

              How is the 24V to the pump connected? Could noise on the 24V line be caused by the pump pwm?

              bwnanceundefined 1 Reply Last reply Reply Quote 0
              • bwnanceundefined
                bwnance @markz
                last edited by

                @markz
                Resistance on my heated bed (measured at connector on board) is 3.3ohms, it's a 24v bed, so that would be a ~175watt bed, correct? I'm using a Mean Well 24v 350w PSU and my hotend is 50w, so i should have plenty of extra room, wattage wise, right?

                24v to the pump is over a fan header on the board (AFAIK newer duets have the flyback diode on all fan inputs internally), I'm not sure how to diagnose if i have noise on the 24v line.

                markzundefined 1 Reply Last reply Reply Quote 0
                • markzundefined
                  markz @bwnance
                  last edited by

                  @bwnance thanks.

                  The pump has two inputs (kind of) power and control. I know the control line goes to the fan pins but where do you pull off the 24V supply for the pump - is that from the power supply or the duet board somewhere? Are you getting the 24v from the fan header?

                  bwnanceundefined 1 Reply Last reply Reply Quote 0
                  • bwnanceundefined
                    bwnance @markz
                    last edited by

                    @markz I'm not using "EZ-Switch" board that was packaged with the berd-air, so both lines are hooked up to the fan header -- as best as i could tell before installing, this was fine, since the fan headers have flybacks wired into them

                    1 Reply Last reply Reply Quote 0
                    • Phaedruxundefined
                      Phaedrux Moderator
                      last edited by

                      Can you try 3.2 Beta 4? It's believed that a fix for this crash may already be present there.

                      https://github.com/Duet3D/RepRapFirmware/releases

                      Z-Bot CoreXY Build | Thingiverse Profile

                      bwnanceundefined 1 Reply Last reply Reply Quote 0
                      • bwnanceundefined
                        bwnance @Phaedrux
                        last edited by

                        @Phaedrux just upgraded, will do a few test prints! We shall see...

                        Phaedruxundefined 1 Reply Last reply Reply Quote 0
                        • Phaedruxundefined
                          Phaedrux Moderator @bwnance
                          last edited by

                          @bwnance Just realized there is an odd ordering problem on that page that doesn't list the most recent at the top.

                          https://github.com/Duet3D/RepRapFirmware/releases/tag/3.2beta4.1

                          Beta 4.1 can be found here.

                          Z-Bot CoreXY Build | Thingiverse Profile

                          bwnanceundefined 1 Reply Last reply Reply Quote 0
                          • bwnanceundefined
                            bwnance @Phaedrux
                            last edited by

                            @Phaedrux ah, ty! gonna let this print finish on beta 4, then will update to 4.1

                            1 Reply Last reply Reply Quote 0
                            • bwnanceundefined
                              bwnance
                              last edited by bwnance

                              @Phaedrux was out of town for the holidays, just started a 4 hour print and the printer rebooted ~40mins in

                              m122
                              === Diagnostics ===
                              RepRapFirmware for Duet 2 WiFi/Ethernet version 3.2-beta4 running on Duet WiFi 1.02 or later
                              Board ID: 08DJM-9178L-L2MSD-6J1FA-3S46N-KSFYP
                              Used output buffers: 3 of 24 (12 max)
                              === RTOS ===
                              Static ram: 24108
                              Dynamic ram: 99836 of which 60 recycled
                              Never used RAM 6044, free system stack 106 words
                              Tasks: NETWORK(ready,183) HEAT(blocked,308) MAIN(running,451) IDLE(ready,20)
                              Owned mutexes: WiFi(NETWORK)
                              === Platform ===
                              Last reset 00:01:49 ago, cause: software
                              Last software reset at 2021-01-07 01:30, reason: AssertionFailed, GCodes spinning, available RAM 5836, slot 1
                              Software reset code 0x4123 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0041f000 BFAR 0xe000ed38 SP 0x200044ac Task MAIN
                              Stack: 00000c55 00472af0 00452a9d 2000ae20 00000000 200094c8 00000000 00000000 00451edb 00000000 ffffffff 2000ae20 200034cc 200094c8 ffffffff 00000000 20004524 a5a5a5a5 00451f1b 20004514 200094b8 20008380 0044f543 20008380 0042ee47 2001e448 200094bc
                              Error status: 0x00
                              MCU temperature: min 25.0, current 25.2, max 26.1
                              Supply voltage: min 23.9, current 24.1, max 24.3, under voltage events: 0, over voltage events: 0, power good: yes
                              Driver 0: position 63150, standstill, SG min/max 0/138
                              Driver 1: position 63150, standstill, SG min/max 0/133
                              Driver 2: position 63150, standstill, SG min/max 0/156
                              Driver 3: position 0, standstill, SG min/max not available
                              Driver 4: position 0, standstill, SG min/max not available
                              Driver 5: position 0
                              Driver 6: position 0
                              Driver 7: position 0
                              Driver 8: position 0
                              Driver 9: position 0
                              Driver 10: position 0
                              Driver 11: position 0
                              Date/time: 2021-01-07 01:32:29
                              Cache data hit count 170332161
                              Slowest loop: 3.51ms; fastest: 0.17ms
                              I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
                              === Storage ===
                              Free file entries: 10
                              SD card 0 detected, interface speed: 20.0MBytes/sec
                              SD card longest read time 1.1ms, write time 0.0ms, max retries 0
                              === Move ===
                              Hiccups: 0(0), FreeDm: 169, MinFreeDm: 163, MaxWait: 22002ms
                              Bed compensation in use: none, comp offset 0.000
                              === MainDDARing ===
                              Scheduled moves 5, completed moves 5, StepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
                              === AuxDDARing ===
                              Scheduled moves 0, completed moves 0, StepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
                              === Heat ===
                              Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
                              === GCodes ===
                              Segments left: 0
                              Movement lock held by null
                              HTTP is idle in state(s) 0
                              Telnet is idle in state(s) 0
                              File is idle in state(s) 0
                              USB is idle in state(s) 0
                              Aux is idle in state(s) 0
                              Trigger is idle in state(s) 0
                              Queue is idle in state(s) 0
                              LCD is idle in state(s) 0
                              Daemon is idle in state(s) 0
                              Autopause is idle in state(s) 0
                              Code queue is empty.
                              === Network ===
                              Slowest loop: 15.70ms; fastest: 0.00ms
                              Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions
                              HTTP sessions: 1 of 8
                              - WiFi -
                              Network state is active
                              WiFi module is connected to access point 
                              Failed messages: pending 0, notready 0, noresp 0
                              WiFi firmware version 1.25beta0
                              WiFi MAC address dc:4f:22:6e:6c:ca
                              WiFi Vcc 3.43, reset reason Turned on by main processor
                              WiFi flash size 4194304, free heap 19552
                              WiFi IP address 192.168.86.34
                              WiFi signal strength -57dBm, mode 802.11n, reconnections 0, sleep mode modem
                              Clock register 00002002
                              Socket states: 0 0 0 0 0 0 0 0
                              

                              I see that 4.2 was just released so i'll update to that and try again.

                              1 Reply Last reply Reply Quote 1
                              • bwnanceundefined
                                bwnance
                                last edited by

                                @Phaedrux no dice, another crash. @dc42 any ideas?

                                M122
                                === Diagnostics ===
                                RepRapFirmware for Duet 2 WiFi/Ethernet version 3.2 running on Duet WiFi 1.02 or later
                                Board ID: 08DJM-9178L-L2MSD-6J1FA-3S46N-KSFYP
                                Used output buffers: 3 of 24 (12 max)
                                === RTOS ===
                                Static ram: 23460
                                Dynamic ram: 72744 of which 60 recycled
                                Never used RAM 15816, free system stack 99 words
                                Tasks: NETWORK(ready,157) HEAT(blocked,307) MAIN(running,450) IDLE(ready,19)
                                Owned mutexes:
                                === Platform ===
                                Last reset 00:01:12 ago, cause: software
                                Last software reset at 2021-01-07 19:24, reason: HardFault invState, GCodes spinning, available RAM 15608, slot 1
                                Software reset code 0x4063 HFSR 0x40000000 CFSR 0x00020000 ICSR 0x0041f003 BFAR 0xe000ed38 SP 0x2001fe90 Task MAIN Freestk 29308 ok
                                Stack: 00000000 00000001 400e1400 00001000 3ed0bedf 0044adf3 2001ff28 400f0227 00000160 00000100 2001db10 fffffff1 000001ab 00000000 00a69e38 0000012b 2001c8b8 38000000 005a0073 00000001 28bb5437 fffffffb 29767437 2000770e 2001ff28 01000001 2001ff28
                                Error status: 0x00
                                Aux0 errors 0,0,0
                                MCU temperature: min 24.9, current 25.4, max 26.0
                                Supply voltage: min 24.0, current 24.1, max 24.3, under voltage events: 0, over voltage events: 0, power good: yes
                                Driver 0: position 63150, standstill, SG min/max 0/147
                                Driver 1: position 63150, standstill, SG min/max 0/131
                                Driver 2: position 63150, standstill, SG min/max 0/157
                                Driver 3: position 0, standstill, SG min/max not available
                                Driver 4: position 0, standstill, SG min/max not available
                                Driver 5: position 0
                                Driver 6: position 0
                                Driver 7: position 0
                                Driver 8: position 0
                                Driver 9: position 0
                                Driver 10: position 0
                                Driver 11: position 0
                                Date/time: 2021-01-07 19:25:21
                                Cache data hit count 87576278
                                Slowest loop: 4.81ms; fastest: 0.20ms
                                I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
                                === Storage ===
                                Free file entries: 10
                                SD card 0 detected, interface speed: 20.0MBytes/sec
                                SD card longest read time 0.9ms, write time 0.0ms, max retries 0
                                === Move ===
                                DMs created 83, maxWait 11729ms, bed compensation in use: none, comp offset 0.000
                                === MainDDARing ===
                                Scheduled moves 5, completed moves 5, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
                                === AuxDDARing ===
                                Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
                                === Heat ===
                                Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
                                === GCodes ===
                                Segments left: 0
                                Movement lock held by null
                                HTTP is idle in state(s) 0
                                Telnet is idle in state(s) 0
                                File is idle in state(s) 0
                                USB is idle in state(s) 0
                                Aux is idle in state(s) 0
                                Trigger is idle in state(s) 0
                                Queue is idle in state(s) 0
                                LCD is idle in state(s) 0
                                Daemon is idle in state(s) 0
                                Autopause is idle in state(s) 0
                                Code queue is empty.
                                === Network ===
                                Slowest loop: 15.95ms; fastest: 0.00ms
                                Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions
                                HTTP sessions: 1 of 8
                                - WiFi -
                                Network state is active
                                WiFi module is connected to access point 
                                Failed messages: pending 0, notready 0, noresp 0
                                WiFi firmware version 1.25
                                WiFi MAC address dc:4f:22:6e:6c:ca
                                WiFi Vcc 3.43, reset reason Turned on by main processor
                                WiFi flash size 4194304, free heap 19568
                                WiFi IP address 192.168.86.34
                                WiFi signal strength -56dBm, mode 802.11n, reconnections 0, sleep mode modem
                                Clock register 00002002
                                Socket states: 0 0 0 0 0 0 0 0
                                
                                1 Reply Last reply Reply Quote 0
                                • Vetiundefined
                                  Veti
                                  last edited by

                                  can you post a picture of your wiring on the duet?

                                  1 Reply Last reply Reply Quote 0
                                  • dc42undefined
                                    dc42 administrators
                                    last edited by dc42

                                    @bwnance, your M122 software reset data doesn't make any sense, so I think it must have been caused by a transient or possible power brownout. Can you run a few more prints to see if any future crashes are similar? You can do air prints to avoid wasting filament.

                                    The assertion failure you had with 3.2beta4 is different, that's a known bug that was fixed in 3.2beta4.1.

                                    Duet WiFi hardware designer and firmware engineer
                                    Please do not ask me for Duet support via PM or email, use the forum
                                    http://www.escher3d.com, https://miscsolutions.wordpress.com

                                    bwnanceundefined 1 Reply Last reply Reply Quote 0
                                    • bwnanceundefined
                                      bwnance @dc42
                                      last edited by bwnance

                                      @dc42 Will do dry-runs throughout today. It's weird, sometimes it completes a print just fine, sometimes it fails -- but all with the same file.

                                      @Veti
                                      szoter_annotated_image.jpeg

                                      1 Reply Last reply Reply Quote 0
                                      • hackinistratorundefined
                                        hackinistrator
                                        last edited by

                                        motors very close to the board .
                                        maybe try to add some shielding , or relocate the board just for a test .

                                        1 Reply Last reply Reply Quote 0
                                        • bwnanceundefined
                                          bwnance
                                          last edited by

                                          @dc42 crash on a no-filament run:

                                          m122
                                          === Diagnostics ===
                                          RepRapFirmware for Duet 2 WiFi/Ethernet version 3.2 running on Duet WiFi 1.02 or later
                                          Board ID: 08DJM-9178L-L2MSD-6J1FA-3S46N-KSFYP
                                          Used output buffers: 3 of 24 (11 max)
                                          === RTOS ===
                                          Static ram: 23460
                                          Dynamic ram: 72744 of which 24 recycled
                                          Never used RAM 15852, free system stack 191 words
                                          Tasks: NETWORK(ready,182) HEAT(blocked,309) MAIN(running,452) IDLE(ready,19)
                                          Owned mutexes: WiFi(NETWORK)
                                          === Platform ===
                                          Last reset 00:01:26 ago, cause: software
                                          Last software reset at 2021-01-08 15:42, reason: HardFault imprec, GCodes spinning, available RAM 15608, slot 0
                                          Software reset code 0x4063 HFSR 0x40000000 CFSR 0x00000400 ICSR 0x00400003 BFAR 0xe000ed38 SP 0x2001ffa8 Task MAIN Freestk 29378 ok
                                          Stack: 20008e54 20008e50 1cc5b538 00000004 0000000a ffffffed 0040f1f8 010f001f 20008e54 20003440 20008110 20004494 a5a5a5a5 ffffffed 00000000 00f00000 e000ef34 c0000000 20004690 004548f5 0045465c 61000000 ffffffff ffffffff ffffffff ffffffff ffffffff
                                          Error status: 0x00
                                          Aux0 errors 0,0,0
                                          MCU temperature: min 24.0, current 24.4, max 25.2
                                          Supply voltage: min 23.9, current 24.1, max 24.3, under voltage events: 0, over voltage events: 0, power good: yes
                                          Driver 0: position 62528, standstill, SG min/max not available
                                          Driver 1: position 62528, standstill, SG min/max not available
                                          Driver 2: position 62528, standstill, SG min/max not available
                                          Driver 3: position 0, standstill, SG min/max not available
                                          Driver 4: position 0, standstill, SG min/max not available
                                          Driver 5: position 0
                                          Driver 6: position 0
                                          Driver 7: position 0
                                          Driver 8: position 0
                                          Driver 9: position 0
                                          Driver 10: position 0
                                          Driver 11: position 0
                                          Date/time: 2021-01-08 15:43:37
                                          Cache data hit count 105466486
                                          Slowest loop: 4.99ms; fastest: 0.20ms
                                          I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
                                          === Storage ===
                                          Free file entries: 10
                                          SD card 0 detected, interface speed: 20.0MBytes/sec
                                          SD card longest read time 1.1ms, write time 0.0ms, max retries 0
                                          === Move ===
                                          DMs created 83, maxWait 0ms, bed compensation in use: none, comp offset 0.000
                                          === MainDDARing ===
                                          Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
                                          === AuxDDARing ===
                                          Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
                                          === Heat ===
                                          Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
                                          === GCodes ===
                                          Segments left: 0
                                          Movement lock held by null
                                          HTTP is idle in state(s) 0
                                          Telnet is idle in state(s) 0
                                          File is idle in state(s) 0
                                          USB is idle in state(s) 0
                                          Aux is idle in state(s) 0
                                          Trigger is idle in state(s) 0
                                          Queue is idle in state(s) 0
                                          LCD is idle in state(s) 0
                                          Daemon is idle in state(s) 0
                                          Autopause is idle in state(s) 0
                                          Code queue is empty.
                                          === Network ===
                                          Slowest loop: 16.01ms; fastest: 0.00ms
                                          Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions
                                          HTTP sessions: 1 of 8
                                          - WiFi -
                                          Network state is active
                                          WiFi module is connected to access point 
                                          Failed messages: pending 0, notready 0, noresp 0
                                          WiFi firmware version 1.25
                                          WiFi MAC address dc:4f:22:6e:6c:ca
                                          WiFi Vcc 3.43, reset reason Turned on by main processor
                                          WiFi flash size 4194304, free heap 22320
                                          WiFi IP address 192.168.86.34
                                          WiFi signal strength -55dBm, mode 802.11n, reconnections 0, sleep mode modem
                                          Clock register 00002002
                                          Socket states: 0 0 0 0 0 0 0 0
                                          
                                          1 Reply Last reply Reply Quote 0
                                          • bwnanceundefined
                                            bwnance
                                            last edited by

                                            Anotha one.

                                            M122
                                            === Diagnostics ===
                                            RepRapFirmware for Duet 2 WiFi/Ethernet version 3.2 running on Duet WiFi 1.02 or later
                                            Board ID: 08DJM-9178L-L2MSD-6J1FA-3S46N-KSFYP
                                            Used output buffers: 3 of 24 (11 max)
                                            === RTOS ===
                                            Static ram: 23460
                                            Dynamic ram: 72744 of which 24 recycled
                                            Never used RAM 15852, free system stack 193 words
                                            Tasks: NETWORK(ready,194) HEAT(blocked,307) MAIN(running,456) IDLE(ready,19)
                                            Owned mutexes:
                                            === Platform ===
                                            Last reset 00:00:21 ago, cause: software
                                            Last software reset at 2021-01-08 16:41, reason: HardFault invState, GCodes spinning, available RAM 15608, slot 1
                                            Software reset code 0x4063 HFSR 0x40000000 CFSR 0x00020000 ICSR 0x0041f803 BFAR 0xe000ed38 SP 0x200043e0 Task MAIN Freestk 976 ok
                                            Stack: 00000002 200099c0 00000100 00000000 200178b8 0042d68f 00000000 600f0000 0042d75a 610f0000 ffffffff 0000000a 010095c8 20008e54 00000000 00000000 00000000 00454a15 20008e54 00000000 20008e54 00454daf 200099c4 00454f3b 00000000 ffffffff 200099c0
                                            Error status: 0x00
                                            Aux0 errors 0,0,0
                                            MCU temperature: min 24.0, current 24.6, max 25.0
                                            Supply voltage: min 24.0, current 24.0, max 24.2, under voltage events: 0, over voltage events: 0, power good: yes
                                            Driver 0: position 62528, standstill, SG min/max not available
                                            Driver 1: position 62528, standstill, SG min/max not available
                                            Driver 2: position 62528, standstill, SG min/max not available
                                            Driver 3: position 0, standstill, SG min/max not available
                                            Driver 4: position 0, standstill, SG min/max not available
                                            Driver 5: position 0
                                            Driver 6: position 0
                                            Driver 7: position 0
                                            Driver 8: position 0
                                            Driver 9: position 0
                                            Driver 10: position 0
                                            Driver 11: position 0
                                            Date/time: 2021-01-08 16:42:20
                                            Cache data hit count 25138224
                                            Slowest loop: 4.94ms; fastest: 0.20ms
                                            I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
                                            === Storage ===
                                            Free file entries: 10
                                            SD card 0 detected, interface speed: 20.0MBytes/sec
                                            SD card longest read time 1.1ms, write time 0.0ms, max retries 0
                                            === Move ===
                                            DMs created 83, maxWait 0ms, bed compensation in use: none, comp offset 0.000
                                            === MainDDARing ===
                                            Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
                                            === AuxDDARing ===
                                            Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
                                            === Heat ===
                                            Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
                                            === GCodes ===
                                            Segments left: 0
                                            Movement lock held by null
                                            HTTP is idle in state(s) 0
                                            Telnet is idle in state(s) 0
                                            File is idle in state(s) 0
                                            USB is idle in state(s) 0
                                            Aux is idle in state(s) 0
                                            Trigger is idle in state(s) 0
                                            Queue is idle in state(s) 0
                                            LCD is idle in state(s) 0
                                            Daemon is idle in state(s) 0
                                            Autopause is idle in state(s) 0
                                            Code queue is empty.
                                            === Network ===
                                            Slowest loop: 15.68ms; fastest: 0.00ms
                                            Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions
                                            HTTP sessions: 1 of 8
                                            - WiFi -
                                            Network state is active
                                            WiFi module is connected to access point 
                                            Failed messages: pending 0, notready 0, noresp 0
                                            WiFi firmware version 1.25
                                            WiFi MAC address dc:4f:22:6e:6c:ca
                                            WiFi Vcc 3.43, reset reason Turned on by main processor
                                            WiFi flash size 4194304, free heap 22400
                                            WiFi IP address 192.168.86.34
                                            WiFi signal strength -57dBm, mode 802.11n, reconnections 0, sleep mode modem
                                            Clock register 00002002
                                            Socket states: 0 0 0 0 0 0 0 0
                                            
                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA