Duet 5 mini Feedback

Veti

with order i mean the 3.3v is actually the 5v in and out are also swapped.

A Former User

@Veti

You didnt say that originally so again do you expect people to be mind readers ?

Veti

sorry if it wasnt clear what i mean in the wrong order

Veti

@CaLviNx said in Duet 5 mini Feedback:

Also I would advise using the config tool only as as method of obtaining a basic layout of the structure and then examining the wiring diagram AND the duet g.code page which will allow you to fully configure the board in the way you want
And generate a good config.g

my config.g is already set up.

its just a bug that i noticed in the configurator that for bltouch you can select a port that does not exist.

A Former User

I'm told my mini 5 is sitting in "customs" in larnaca so until i actually get my hands on it i cant comment as to whether 3.3 & 5v are swapped or not, i await someone from the duet team to provide an explanation

(EDIT) looking at the diagram between the mini5 and the duet 3 they both show the order for each plug as being:

3.3v
ioX.in
GND
ioX.out
5V EXT

So it would be somewhat strange for them to change things

Veti

img upload in the forum isnt working for some reason

https://ibb.co/Vwz1Cnk

as you can see the io0 lowest pin close to the 26 pin header is 5v in the diagram its 3.3v

my endstops did not work at first because i wired them according to the diagram.
but the in and out are swapped.

A Former User

@Veti

i wouldnt trust a screen print, now a multi-meter showing me what is actually being output to what pin i would

Veti

@CaLviNx said in Duet 5 mini Feedback:

i wouldnt trust a screen print, now a multi-meter showing me what is actually being output to what pin i would

i already confirmed it with my endstops.

A Former User

Then we wait for some info from the Duet team as to what has happened and if there are any changes between the 0.4 and 0.5 boards, as i see from your picture your board is an 0.4

@dc42

&

@T3P3Tony