Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    New stable firmware bundle 3.2 released

    Scheduled Pinned Locked Moved
    Firmware installation
    18
    41
    3.5k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • dc42undefined
      dc42 administrators
      last edited by chrishamm

      On behalf of the Duet 3D team I am pleased to announce RepRapFirmware 3.2 stable. Here are the upgrade instructions:

      • If you are running RepRapFirmware 3.0 or later in standalone mode, download Duet2and3Firmware.zip from https://github.com/Duet3D/RepRapFirmware/releases/tag/3.2 and upload it to your Duet via the web interface
      • If you are using Duet + SBC, update from the package server in the usual way (sudo apt-get update followed by sudo apt-get upgrade)
      • If you are running RepRapFirmware 2.x you will need to upgrade to firmware 3.0 first, then you can immediately upgrade to 3.2. Alternatively, if you are comfortable using Bossa, you can upgrade directly to 3.2 using Bossa.

      Upgrade notes and change lists:

      • RRF: https://github.com/Duet3D/RepRapFirmware/blob/v3-dev/WHATS_NEW_RRF3.md
      • DWC: https://github.com/Duet3D/DuetWebControl/blob/master/WHATS_NEW.md
      • DSF: https://github.com/Duet3D/DuetSoftwareFramework/blob/master/WHATS_NEW.md

      If you encounter problems with this release, or problems upgrading to it, please start a new thread to describe those issues.

      Edit: If you are on the unstable package feed (Duet + SBC), you can update to the latest version as usual again. The corresponding packages have been fixed.

      Duet WiFi hardware designer and firmware engineer
      Please do not ask me for Duet support via PM or email, use the forum
      http://www.escher3d.com, https://miscsolutions.wordpress.com

      A Former User? 1 Reply Last reply Reply Quote 19
      • PeterH1500undefined
        PeterH1500
        last edited by

        Thank you for your hard work in producing this update.

        Unfortunately, I have a problem when attempting to install RRF 3.2 that results in the following error message -

        Error: M997: In-application programming binary "Duet2CombinedIAP.bin" not found.

        Sure enough, a file named "Duet2CombinedIAP.bin" is not present in the downloaded "Duet2and3Firmware-3.2.zip".

        Please could you advise what I should do?

        I have a Duet 2 WiFi successfully running RRF3.1.1, & I've updated to DWC3.2. The "Duet2and3Firmware-3.2.zip" successfully uploads & unzips and I'm asked if I wish to install the new firmware.

        Vetiundefined 1 Reply Last reply Reply Quote 0
        • Vetiundefined
          Veti @PeterH1500
          last edited by

          @PeterH1500 said in New stable firmware bundle 3.2 released:

          Error: M997: In-application programming binary "Duet2CombinedIAP.bin" not found.

          its here
          https://github.com/Duet3D/RepRapFirmware/releases/tag/3.0

          it was part of the 3.0 update. if you went with bossa update, you might have missed it.

          PeterH1500undefined 1 Reply Last reply Reply Quote 1
          • PeterH1500undefined
            PeterH1500 @Veti
            last edited by

            @Veti Thank you. That worked (confirmed by M122).

            I'd assumed from the upgrade instructions (Users running RepRapFirmware 3.0 or later should be able to upgrade by uploading file Duet2and3Firmware-3.2.zip. The individual files are also included here in case of difficulty.) that everything needed would either be in the "Duet2and3Firmware-3.2.zip" or in list . The list does not include a copy of "Duet2CombinedIAP.bin" and it doesn't seem to have been retained on my DUET SD card from my previous update to RRF3.0. But, my problem solved in double quick time. Thanks again.

            1 Reply Last reply Reply Quote 1
            • MartinNYHCundefined
              MartinNYHC
              last edited by

              Very nice that the PanelDue can be updated now via GCODE 🙂 👏

              1 Reply Last reply Reply Quote 0
              • A Former User?
                A Former User @dc42
                last edited by

                I like the "colour-coding" the most -> So much better when you have to put in a ton of comments if the client want´s it that way BIG THANKS

                1 Reply Last reply Reply Quote 1
                • Dr_Ju_Juundefined
                  Dr_Ju_Ju
                  last edited by

                  Thank you, the update went well, just dragging & dropping the combined zip file onto the UI, just 2 'niggles', 1. the UI 'lost' the dark theme, & 2. clicking on the new "Files \ Display" icon in the left hand side, results in an error message:
                  "Failed to get file list
                  Directory 0:/menu not found"
                  neither of which is biggie & easily sorted !!

                  Julian,

                  Old goat, learning new things….

                  1 Reply Last reply Reply Quote 0
                  • jmshepundefined
                    jmshep
                    last edited by

                    Upgraded from 3.2RC and all went well except my webcam settings in DWC were corrupted. Amended missing / additional text and now working as before.

                    1 Reply Last reply Reply Quote 0
                    • achrnundefined
                      achrn
                      last edited by

                      Thank you.

                      A minor thing (not really a problem, so not requiring anew thread, I think): if you run a heater tune for the bed, the consiole now gets a message e.g.:

                      09/01/2021, 12:52:41 	Edit the M307 H0 command in config.g to match this. Omit the V parameter if the heater is not powered from VIN.
                      09/01/2021, 12:52:41 	Auto tuning heater 0 completed after 3 idle and 5 tuning cycles in 2931 seconds. This heater needs the following M307 command:
                                              M307 H0 R0.243 C1266.3 D46.33 S1.00 V24.1
                      

                      However, since the bed heater defaults to bang-bang, I think this should be advising to use a command that includes a B0 (assuming that's still the behaviour, if not, https://duet3d.dozuki.com/Wiki/Gcode#Section_M307_Set_or_report_heating_process_parameters needs an update).

                      1 Reply Last reply Reply Quote 0
                      • amjm22undefined
                        amjm22
                        last edited by

                        How long does it take to update the firmware? Mine has been going on for 40 minutesupload.PNG

                        1 Reply Last reply Reply Quote 0
                        • dc42undefined
                          dc42 administrators
                          last edited by

                          It should be much quicker than that. I suggest you try refreshing the DWC browser page. If it still says that firmware updates are being installed, reboot the Duet.

                          Duet WiFi hardware designer and firmware engineer
                          Please do not ask me for Duet support via PM or email, use the forum
                          http://www.escher3d.com, https://miscsolutions.wordpress.com

                          amjm22undefined 1 Reply Last reply Reply Quote 0
                          • amjm22undefined
                            amjm22 @dc42
                            last edited by

                            @dc42 Thanks! I held my breath, restarted and it came back on... Things were touch and go for a moment!

                            I appreciate all of the support, You guys are amazing

                            dc42undefined 1 Reply Last reply Reply Quote 0
                            • dc42undefined
                              dc42 administrators @amjm22
                              last edited by

                              @amjm22 said in New stable firmware bundle 3.2 released:

                              @dc42 Thanks! I held my breath, restarted and it came back on... Things were touch and go for a moment!

                              I appreciate all of the support, You guys are amazing

                              Did the upgrade succeed? Use M115 to check the firmware version, or look in the Machine Specific tab of DWC.

                              Duet WiFi hardware designer and firmware engineer
                              Please do not ask me for Duet support via PM or email, use the forum
                              http://www.escher3d.com, https://miscsolutions.wordpress.com

                              amjm22undefined 1 Reply Last reply Reply Quote 0
                              • amjm22undefined
                                amjm22 @dc42
                                last edited by

                                @dc42 Yes, it worked! Thanks

                                1 Reply Last reply Reply Quote 0
                                • amjm22undefined
                                  amjm22
                                  last edited by

                                  When installing The Webserver to 3.2 I get this error -

                                  RepRapFirmware for Duet 3 MB6HC version 3.2 running on Duet 3 MB6HC v0.6 or 1.0 (SBC mode)

                                  1/10/2021, 11:39:15 AM Failed to upload materialdesignicons-webfont.4187121a.woff2
                                  Operation failed (Reason: Access to the path '/opt/dsf/sd/www/fonts/materialdesignicons-webfont.4187121a.woff2' is denied.)

                                  Has anyone seen this before?

                                  Phaedruxundefined 1 Reply Last reply Reply Quote 0
                                  • Tapetenhobelundefined
                                    Tapetenhobel
                                    last edited by

                                    Hi,
                                    I update from a Duet2 Wifi to the new mini+ and hooked it to a raspberry pi.
                                    A friend and me are currently developing a multi-Platform print monitor and I've used queries via /rr_status?type=2 and so on before, but with DWC running on the pi I only get a 404:Not found when I try to query DWC. It was running fine on the Duet2 with the beta and RC-versions. I also didn't found anything in the release notes regarding this.
                                    Do I miss something?

                                    Thanks

                                    Sapphire Pro, Mini 5+, BLTouch, PanelDue 3 5"
                                    Anycubic i3 Mega, SKR 1.4, Klipper

                                    resamundefined 1 Reply Last reply Reply Quote 0
                                    • resamundefined
                                      resam @Tapetenhobel
                                      last edited by

                                      @Tapetenhobel not really a v3.2 problem, or is it?

                                      I think you are looking for the new API when running in "SBC mode" with DuetSoftwareFramework:
                                      https://github.com/Duet3D/DuetSoftwareFramework#get-machinestatus

                                      Tapetenhobelundefined 1 Reply Last reply Reply Quote 0
                                      • Phaedruxundefined
                                        Phaedrux Moderator @amjm22
                                        last edited by

                                        @amjm22 How are you updating? If using the SBC you should be using sudo apt update/upgrade method.

                                        Z-Bot CoreXY Build | Thingiverse Profile

                                        amjm22undefined 1 Reply Last reply Reply Quote 0
                                        • amjm22undefined
                                          amjm22 @Phaedrux
                                          last edited by

                                          @Phaedrux - sudo apt update/upgrade. I did that, I'm still on Duet Web Control 3.1.1

                                          Thanks for your reply

                                          amjm22undefined 1 Reply Last reply Reply Quote 0
                                          • amjm22undefined
                                            amjm22 @amjm22
                                            last edited by

                                            @amjm22 I did again and it worked! unreal

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA