Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Question about bed probing

    Scheduled Pinned Locked Moved
    General Discussion
    5
    21
    636
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • fcwiltundefined
      fcwilt @User3D
      last edited by

      @User3D said in Question about bed probing:

      I still don't know if my bed is stable. So I want this feature where it will show me error dialogue telling me 'You need to level your bed' when bed is extremely titled. So basically I want to compare height errors with each other.

      But to determine if the bed needed leveling it would perform all of the probing needed to level the bed - so why not just continue the process and level it?

      How are you leveling you bed?

      Thanks.

      Frederick

      Printers: a small Utilmaker style, a small CoreXY and a E3D MS/TC setup. Various hotends. Using Duet 3 hardware running 3.4.6

      1 Reply Last reply Reply Quote 1
      • DIY-O-Sphereundefined
        DIY-O-Sphere @User3D
        last edited by DIY-O-Sphere

        @User3D said in Question about bed probing:

        I still don't know if my bed is stable

        So the first thing to improve is the stabilty of the bed.
        Otherwise you will compare one error to an other...
        Or you have to mesh level before every print...
        Had the same issue with my Hevo.
        After modifying the bed frame, the thing is rock solid.
        I mesh level the bed only for sanity 3-4 times a year..

        (UTC+1)

        oziundefined 1 Reply Last reply Reply Quote 0
        • oziundefined
          ozi @DIY-O-Sphere
          last edited by

          @DIY-O-Sphere How you modified your HEVO Bed? 🙂

          DIY-O-Sphereundefined 1 Reply Last reply Reply Quote 0
          • DIY-O-Sphereundefined
            DIY-O-Sphere @ozi
            last edited by DIY-O-Sphere

            @ozi

            3f657097-8674-435c-8aad-e818dc24d1a7-grafik.png
            ea501c2f-9c54-485d-a675-9a24b6947619-grafik.png

            Edit:
            0bc9966e-a2f9-475e-a025-5c42c48addad-grafik.png

            (UTC+1)

            1 Reply Last reply Reply Quote 0
            • User3Dundefined
              User3D
              last edited by

              @fcwilt said in Question about bed probing:

              so why not just continue the process and level it?

              wanted to make it less human dependent .
              No biggie... I'll go with current method .

              Thanks for the help 🙂

              fcwiltundefined 1 Reply Last reply Reply Quote 1
              • fcwiltundefined
                fcwilt @User3D
                last edited by

                @User3D said in Question about bed probing:

                wanted to make it less human dependent .

                Hi,

                I just run bed leveling twice at the start of a print. It only probes the bed at three points each time so it's not like it take a long time.

                Can you clarify what you mean by "human dependent"?

                Thanks.

                Printers: a small Utilmaker style, a small CoreXY and a E3D MS/TC setup. Various hotends. Using Duet 3 hardware running 3.4.6

                User3Dundefined 1 Reply Last reply Reply Quote 0
                • User3Dundefined
                  User3D @fcwilt
                  last edited by

                  @fcwilt

                  If error difference is greater than a value then I want it to tell me. So then I will level my bed manually. 😬

                  fcwiltundefined 1 Reply Last reply Reply Quote 0
                  • fcwiltundefined
                    fcwilt @User3D
                    last edited by

                    @User3D said in Question about bed probing:

                    @fcwilt

                    If error difference is greater than a value then I want it to tell me. So then I will level my bed manually. 😬

                    Perhaps you and I are talking about different types of bed leveling?

                    What do you do to manually level your bed?

                    Thanks.

                    Frederick

                    Printers: a small Utilmaker style, a small CoreXY and a E3D MS/TC setup. Various hotends. Using Duet 3 hardware running 3.4.6

                    User3Dundefined 1 Reply Last reply Reply Quote 0
                    • User3Dundefined
                      User3D @fcwilt
                      last edited by

                      @fcwilt paper technique I am talking about here .

                      fcwiltundefined 1 Reply Last reply Reply Quote 0
                      • fcwiltundefined
                        fcwilt @User3D
                        last edited by

                        @User3D said in Question about bed probing:

                        @fcwilt paper technique I am talking about here .

                        So you don't have a Z probe?

                        Frederick

                        Printers: a small Utilmaker style, a small CoreXY and a E3D MS/TC setup. Various hotends. Using Duet 3 hardware running 3.4.6

                        User3Dundefined 1 Reply Last reply Reply Quote 0
                        • User3Dundefined
                          User3D @fcwilt
                          last edited by

                          @fcwilt I have

                          fcwiltundefined 1 Reply Last reply Reply Quote 0
                          • fcwiltundefined
                            fcwilt @User3D
                            last edited by

                            @User3D said in Question about bed probing:

                            @fcwilt I have

                            If you have a z probe why would you be using paper to level the bed?

                            Frederick

                            Printers: a small Utilmaker style, a small CoreXY and a E3D MS/TC setup. Various hotends. Using Duet 3 hardware running 3.4.6

                            User3Dundefined 1 Reply Last reply Reply Quote 0
                            • User3Dundefined
                              User3D @fcwilt
                              last edited by

                              @fcwilt I started doing so after nozzle ran into my bed and scratched it

                              1 Reply Last reply Reply Quote 0
                              • First post
                                Last post
                              Unless otherwise noted, all forum content is licensed under CC-BY-SA