Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Question about bed probing

    Scheduled Pinned Locked Moved
    General Discussion
    5
    21
    681
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • DIY-O-Sphereundefined
      DIY-O-Sphere @User3D
      last edited by DIY-O-Sphere

      @User3D said in Question about bed probing:

      I still don't know if my bed is stable

      So the first thing to improve is the stabilty of the bed.
      Otherwise you will compare one error to an other...
      Or you have to mesh level before every print...
      Had the same issue with my Hevo.
      After modifying the bed frame, the thing is rock solid.
      I mesh level the bed only for sanity 3-4 times a year..

      (UTC+1)

      oziundefined 1 Reply Last reply Reply Quote 0
      • oziundefined
        ozi @DIY-O-Sphere
        last edited by

        @DIY-O-Sphere How you modified your HEVO Bed? 🙂

        DIY-O-Sphereundefined 1 Reply Last reply Reply Quote 0
        • DIY-O-Sphereundefined
          DIY-O-Sphere @ozi
          last edited by DIY-O-Sphere

          @ozi

          3f657097-8674-435c-8aad-e818dc24d1a7-grafik.png
          ea501c2f-9c54-485d-a675-9a24b6947619-grafik.png

          Edit:
          0bc9966e-a2f9-475e-a025-5c42c48addad-grafik.png

          (UTC+1)

          1 Reply Last reply Reply Quote 0
          • User3Dundefined
            User3D
            last edited by

            @fcwilt said in Question about bed probing:

            so why not just continue the process and level it?

            wanted to make it less human dependent .
            No biggie... I'll go with current method .

            Thanks for the help 🙂

            fcwiltundefined 1 Reply Last reply Reply Quote 1
            • fcwiltundefined
              fcwilt @User3D
              last edited by

              @User3D said in Question about bed probing:

              wanted to make it less human dependent .

              Hi,

              I just run bed leveling twice at the start of a print. It only probes the bed at three points each time so it's not like it take a long time.

              Can you clarify what you mean by "human dependent"?

              Thanks.

              Printers: a E3D MS/TC setup and a RatRig Hybrid. Using Duet 3 hardware running 3.4.6

              User3Dundefined 1 Reply Last reply Reply Quote 0
              • User3Dundefined
                User3D @fcwilt
                last edited by

                @fcwilt

                If error difference is greater than a value then I want it to tell me. So then I will level my bed manually. 😬

                fcwiltundefined 1 Reply Last reply Reply Quote 0
                • fcwiltundefined
                  fcwilt @User3D
                  last edited by

                  @User3D said in Question about bed probing:

                  @fcwilt

                  If error difference is greater than a value then I want it to tell me. So then I will level my bed manually. 😬

                  Perhaps you and I are talking about different types of bed leveling?

                  What do you do to manually level your bed?

                  Thanks.

                  Frederick

                  Printers: a E3D MS/TC setup and a RatRig Hybrid. Using Duet 3 hardware running 3.4.6

                  User3Dundefined 1 Reply Last reply Reply Quote 0
                  • User3Dundefined
                    User3D @fcwilt
                    last edited by

                    @fcwilt paper technique I am talking about here .

                    fcwiltundefined 1 Reply Last reply Reply Quote 0
                    • fcwiltundefined
                      fcwilt @User3D
                      last edited by

                      @User3D said in Question about bed probing:

                      @fcwilt paper technique I am talking about here .

                      So you don't have a Z probe?

                      Frederick

                      Printers: a E3D MS/TC setup and a RatRig Hybrid. Using Duet 3 hardware running 3.4.6

                      User3Dundefined 1 Reply Last reply Reply Quote 0
                      • User3Dundefined
                        User3D @fcwilt
                        last edited by

                        @fcwilt I have

                        fcwiltundefined 1 Reply Last reply Reply Quote 0
                        • fcwiltundefined
                          fcwilt @User3D
                          last edited by

                          @User3D said in Question about bed probing:

                          @fcwilt I have

                          If you have a z probe why would you be using paper to level the bed?

                          Frederick

                          Printers: a E3D MS/TC setup and a RatRig Hybrid. Using Duet 3 hardware running 3.4.6

                          User3Dundefined 1 Reply Last reply Reply Quote 0
                          • User3Dundefined
                            User3D @fcwilt
                            last edited by

                            @fcwilt I started doing so after nozzle ran into my bed and scratched it

                            1 Reply Last reply Reply Quote 0
                            • First post
                              Last post
                            Unless otherwise noted, all forum content is licensed under CC-BY-SA