DuetLapse3

[stuartofmt]

@fractalengineer said in DuetLapse3:

@stuartofmt Thanks Stuart; I did try installing the 3.04 earlier this weekend following each step but got stuck at ffmpeg install; doesn't return anything when checking version.

I guess I'm still way to beginner at linux terminal. I'll try again with the new version

Don't worry - we will get you going.
I'm assuming you are using a raspberry pi ?

The latest version should work with the version of ffmpeg that installs by default with the pi. The only downside is not being able to use the -extratime option.

I'd recommend you reinstall the default ffmpeg and take it from there.
It sounds like you tried to follow my instructions and the installation of the latest ffmpeg failed somehow? If that is correct then lets try to clean it up and get you back to the default. Try the following in order (I just did this on my pi)

cd ~
sudo apt remove ffmpeg

I'm guessing this will say ffmpeg is not installed.

Next:

sudo find / -name ffmpeg

This will may give some output for example:)
find: ‘/run/user/1000/gvfs’: Permission denied
/usr/local/bin/ffmpeg
/usr/local/share/ffmpeg
/usr/local/share/doc/ffmpeg

for each of the files / directories - we'll first delete everything for EXAMPLE

sudo rm -rf /usr/local/bin/ffmpeg
sudo rm -rf /usr/local/share/ffmpeg
sudo rm -rf /usr/local/share/doc/ffmpeg

Next make sure everything is at the latest release level

sudo apt update
sudo apt upgrade

I just did this on my pi - it was quite the upgrade and took quite a while so be patient.

Finally, install the standard ffmpeg

sudo apt install ffmpeg

after that and assuming no errors

ffmpeg -version

should return a bunch of information.

Then reboot for luck

[fractalengineer]

@stuartofmt aww mate you're a saint; didn't expect such a detailed help.

I went through those steps and when doing the find it didn't return anything; so I guess it didn't build properly in the first place (I used the cmake last time)

Seems like everything is installed now; just got to figure out the usage exactly

Thanks!

[SIam]

Hi,

@stuartofmt I have a Problem with layer capturing if i use this nothing will be captured i use the following command to start it

python3 DuetLapse3.py -port 8181 -duet 192.168.188.36 -detect layer -camera1 stream -weburl1 http://192.168.188.34:8081/

This result in

192.168.188.36 ################### Options selected for this run #####################
192.168.188.36 #Environment Settings:
192.168.188.36 # printer         = 192.168.188.36
192.168.188.36 # basedir         = /home/pi/DuetLapse
192.168.188.36 # poll            = 5
192.168.188.36 # logtype         = both
192.168.188.36 # verbose         = False
192.168.188.36 # os              = Linux
192.168.188.36 # host            = 0.0.0.0
192.168.188.36 # port            = 8181
192.168.188.36 # pid            = 7902
192.168.188.36 #Execution Setings:
192.168.188.36 # dontwait        = False
192.168.188.36 # seconds         = 0
192.168.188.36 # detect          = layer
192.168.188.36 # pause           = no
192.168.188.36 # standby     = False
192.168.188.36 #Camera1 Settings:
192.168.188.36 # camera1         = stream
192.168.188.36 # weburl1         = http://192.168.188.34:8081/
192.168.188.36 # Video Settings:
192.168.188.36 # extratime   =     0
192.168.188.36 ###################################################################
192.168.188.36
192.168.188.36
192.168.188.36
192.168.188.36 ###############################################################
192.168.188.36 Connected to printer at 192.168.188.36 using version 3.2 and API access using rr_model
192.168.188.36 ###############################################################
192.168.188.36
192.168.188.36
192.168.188.36 ##########################################################
192.168.188.36 ***** Started http listener *****
192.168.188.36 ##########################################################
192.168.188.36
192.168.188.36
192.168.188.36 ##########################################################
192.168.188.36 Will start capturing images on first layer change
192.168.188.36 ##########################################################
192.168.188.36
192.168.188.36
192.168.188.36 ##########################################################
192.168.188.36 Video will be created when printing ends.
192.168.188.36 Or, press Ctrl+C one time to stop capture and create video.
192.168.188.36 ##########################################################
192.168.188.36
192.168.188.36 ****** Printer State changed to waiting *****
192.168.188.36 ****** Printer State changed to printing *****
192.168.188.36 ****** Printer State changed to completed *****
192.168.188.36 End of Print Job - Post Processing
192.168.188.36 ++++++ Entering restart state ++++++
192.168.188.36
192.168.188.36 Camera1: Cannot create video with only 0 frames
192.168.188.36 ****** Printer State changed to waiting *****

If i use the Time capturing option it works as it should

/DuetLapse $ python3 DuetLapse3.py -port 8181 -duet 192.168.188.36 -seconds 20 -detect none -camera1 stream -weburl1 http://192.168.188.34:8081/
..
..
..
192.168.188.36 ##########################################################
192.168.188.36 Video will be created when printing ends.
192.168.188.36 Or, press Ctrl+C one time to stop capture and create video.
192.168.188.36 ##########################################################
192.168.188.36
192.168.188.36 ****** Printer State changed to waiting *****
192.168.188.36 ****** Printer State changed to printing *****
192.168.188.36 ****** Printer State changed to startnow *****
192.168.188.36 Camera1: capturing frame 0 at layer 72 after 20.0 seconds
192.168.188.36 ****** Printer State changed to printing *****
192.168.188.36 Camera1: capturing frame 1 at layer 73 after 20.0 seconds
192.168.188.36 Camera1: capturing frame 2 at layer 74 after 20.0 seconds
192.168.188.36 Camera1: capturing frame 3 at layer 75 after 20.0 seconds
192.168.188.36 Camera1: capturing frame 4 at layer 76 after 20.0 seconds
192.168.188.36 Camera1: capturing frame 5 at layer 78 after 20.0 seconds
192.168.188.36 Camera1: capturing frame 6 at layer 79 after 20.0 seconds
192.168.188.36 Camera1: capturing frame 7 at layer 80 after 20.0 seconds
^C192.168.188.36 !!!!!! Stopped by SIGINT - Post Processing !!!!!!
192.168.188.36
192.168.188.36 Camera1: Cannot create video with only 8 frames
192.168.188.36 Waiting for http listener to shutdown.
192.168.188.36 Program Terminated

The printer is on the latest stable:

RepRapFirmware for Duet 2 WiFi/Ethernet version 3.2 running on Duet WiFi 1.02 or later + DueX5

Can you please tell me what i did wrong?

[SIam]

my knowledge of python is not really available but when i look at this code:

 #update the layer counter
    global zo1, zo2
    zn = getDuetLayer(apiModel)
    if (cameraname == 'Camera1'):
        zo1 = zn
    else:
        zo2 = zn
    
    if ('layer' in detect):
        if ((not zn == zo1 and cameraname == 'Camera1') or (not zn == zo2 and cameraname == 'Camera2')):
            # Layer changed, take a picture.
            checkForPause()
            logger.info(cameraname+': capturing frame '+str(frame)+' at layer '+str(zn)+' after layer change')           
            onePhoto(cameraname, camera, weburl, camparam)            

    elif ('pause' in detect and printerState == 'paused'):
            checkForPause()
            logger.info(cameraname+': capturing frame '+str(frame)+' at layer '+str(zn)+' at pause in print gcode')
            onePhoto(cameraname, camera, weburl, camparam)

So this script can't access to the take picture routine because zo1 and zn is always the same

I have now altered the code to:

    #update the layer counter
    global zo1, zo2
    zn = getDuetLayer(apiModel)
   # if (cameraname == 'Camera1'):
   #     zo1 = zn
   # else:
   #     zo2 = zn

    if ('layer' in detect):
        if ((not zn == zo1 and cameraname == 'Camera1') or (not zn == zo2 and cameraname == 'Camera2')):
            # Layer changed, take a picture.
            checkForPause()
            logger.info(cameraname+': capturing frame '+str(frame)+' at layer '+str(zn)+' after layer change')
            onePhoto(cameraname, camera, weburl, camparam)

    elif ('pause' in detect and printerState == 'paused'):
            checkForPause()
            logger.info(cameraname+': capturing frame '+str(frame)+' at layer '+str(zn)+' at pause in print gcode')
            onePhoto(cameraname, camera, weburl, camparam)

   # global zo1, zo2
   # zn = getDuetLayer(apiModel)
    if (cameraname == 'Camera1'):
        zo1 = zn
    else:
        zo2 = zn

And for now it works (but i don't know if i have now added a new failure)

[stuartofmt]

@SIam

Hi Sam - sorry you are having problems. The changes you made to the code will most definitely cause problems That piece of code keeps track of layer changes.

Having said that it was my error ...

But first - I see you have started DuetLapse with:

python3 DuetLapse3.py -port 8181 -duet 192.168.188.36 -detect layer -camera1 stream -weburl1 http://192.168.188.34:8081/

You have BOTH your web camera (-weburl1) AND DuetLapse3 on the same port number. This is a no-no. They need to be different. In the next release (I am testing now) - I check to see if the port is already in use and if it is, prevent DuetLapse3 from starting. So please change the -port so that it is on a different and unused port number.

Second - on the layer change - yikes! This is definitely wrong and thanks for pointing it out. I must have copy/pasted that portion into the wrong place when I did some 'tidy up' . I will fix that today. If you want to fix it yourself - move the assignment so that it looks like this:

    #update the layer counter
    global zo1, zo2
    zn = getDuetLayer(apiModel)

    
    if ('layer' in detect):
        if ((not zn == zo1 and cameraname == 'Camera1') or (not zn == zo2 and cameraname == 'Camera2')):
            # Layer changed, take a picture.
            checkForPause()
            logger.info(cameraname+': capturing frame '+str(frame)+' at layer '+str(zn)+' after layer change')           
            onePhoto(cameraname, camera, weburl, camparam)            

    elif ('pause' in detect and duetStatus == 'paused'):
            checkForPause()
            logger.info(cameraname+': capturing frame '+str(frame)+' at layer '+str(zn)+' at pause in print gcode')
            onePhoto(cameraname, camera, weburl, camparam)
            
    if (cameraname == 'Camera1'):
        zo1 = zn
    else:
        zo2 = zn 

In any case, the change to -seconds 20 -detect none is working as it should but that is bypassing the layer check so the change you made has no effect.

[SIam]

Thank you for your assistance!

My start command is correct duetlapse runs on 8181 and the cam on 8081

to your code change the only change i can see is that you have removed the comments is this right ?

[stuartofmt]

@SIam said in DuetLapse3:

Thank you for your assistance!

My start command is correct duetlapse runs on 8181 and the cam on 8081

to your code change the only change i can see is that you have removed the comments is this right ?

Sorry - I misread the port numbers , you are of course correct.

As to the question on the code change - no.

This portion of code

    if (cameraname == 'Camera1'):
        zo1 = zn
    else:
        zo2 = zn

needs to be after this portion (not before - which was the problem )

    if ('layer' in detect):
        if ((not zn == zo1 and cameraname == 'Camera1') or (not zn == zo2 and cameraname == 'Camera2')):
            # Layer changed, take a picture.
            checkForPause()
            logger.info(cameraname+': capturing frame '+str(frame)+' at layer '+str(zn)+' after layer change')           
            onePhoto(cameraname, camera, weburl, camparam)            
 
    elif ('pause' in detect and duetStatus == 'paused'):
            checkForPause()
            logger.info(cameraname+': capturing frame '+str(frame)+' at layer '+str(zn)+' at pause in print gcode')
            onePhoto(cameraname, camera, weburl, camparam)

NOTE THAT THE INDENTING HAS TO BE EXACTLY THE SAME - Python is very particular in that regard - so be careful as you edit

[SIam]

ok! Thank you for your work i love it

[SIam]

is it possible to catch those errors in python ?

Traceback (most recent call last):
  File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 600, in urlopen
    chunked=chunked)
  File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 384, in _make_request
    six.raise_from(e, None)
  File "<string>", line 3, in raise_from
  File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 380, in _make_request
    httplib_response = conn.getresponse()
  File "/usr/lib/python3.7/http/client.py", line 1336, in getresponse
    response.begin()
  File "/usr/lib/python3.7/http/client.py", line 306, in begin
    version, status, reason = self._read_status()
  File "/usr/lib/python3.7/http/client.py", line 267, in _read_status
    line = str(self.fp.readline(_MAXLINE + 1), "iso-8859-1")
  File "/usr/lib/python3.7/socket.py", line 589, in readinto
    return self._sock.recv_into(b)
ConnectionResetError: [Errno 104] Connection reset by peer

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/lib/python3/dist-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 638, in urlopen
    _stacktrace=sys.exc_info()[2])
  File "/usr/lib/python3/dist-packages/urllib3/util/retry.py", line 367, in increment
    raise six.reraise(type(error), error, _stacktrace)
  File "/usr/lib/python3/dist-packages/six.py", line 692, in reraise
    raise value.with_traceback(tb)
  File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 600, in urlopen
    chunked=chunked)
  File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 384, in _make_request
    six.raise_from(e, None)
  File "<string>", line 3, in raise_from
  File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 380, in _make_request
    httplib_response = conn.getresponse()
  File "/usr/lib/python3.7/http/client.py", line 1336, in getresponse
    response.begin()
  File "/usr/lib/python3.7/http/client.py", line 306, in begin
    version, status, reason = self._read_status()
  File "/usr/lib/python3.7/http/client.py", line 267, in _read_status
    line = str(self.fp.readline(_MAXLINE + 1), "iso-8859-1")
  File "/usr/lib/python3.7/socket.py", line 589, in readinto
    return self._sock.recv_into(b)
urllib3.exceptions.ProtocolError: ('Connection aborted.', ConnectionResetError(104, 'Connection reset by peer'))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/pi/DuetLapse/DuetLapse3.py", line 964, in <module>
    duetStatus=getDuetStatus(apiModel)
  File "/home/pi/DuetLapse/DuetLapse3.py", line 694, in getDuetStatus
    r = requests.get(URL, timeout=120)  #Long timeout to handle restart of Duet
  File "/usr/lib/python3/dist-packages/requests/api.py", line 75, in get
    return request('get', url, params=params, **kwargs)
  File "/usr/lib/python3/dist-packages/requests/api.py", line 60, in request
    return session.request(method=method, url=url, **kwargs)
  File "/usr/lib/python3/dist-packages/requests/sessions.py", line 533, in request
    resp = self.send(prep, **send_kwargs)
  File "/usr/lib/python3/dist-packages/requests/sessions.py", line 646, in send
    r = adapter.send(request, **kwargs)
  File "/usr/lib/python3/dist-packages/requests/adapters.py", line 498, in send
    raise ConnectionError(err, request=request)
requests.exceptions.ConnectionError: ('Connection aborted.', ConnectionResetError(104, 'Connection reset by peer'))
^C
pi@raspberrypi:~/DuetLapse $ ./start-lapse stop
192.168.188.36 !!!!!! Stopped by SIGINT - Post Processing !!!!!!
192.168.188.36
pi@raspberrypi:~/DuetLapse $ 192.168.188.36 Camera1: now making 29 frames into a video
192.168.188.36 Video processing complete for Camera1
192.168.188.36 Video is in file "/home/pi/DuetLapse/192-168-188-36/Camera17144-Mon-11-25.mp4"
192.168.188.36 Waiting for http listener to shutdown.
192.168.188.36 Program Terminated
Exception ignored in: <module 'threading' from '/usr/lib/python3.7/threading.py'>
Traceback (most recent call last):
  File "/usr/lib/python3.7/threading.py", line 1281, in _shutdown
    t.join()
  File "/usr/lib/python3.7/threading.py", line 1032, in join
    self._wait_for_tstate_lock()
  File "/usr/lib/python3.7/threading.py", line 1048, in _wait_for_tstate_lock
    elif lock.acquire(block, timeout):
  File "/home/pi/DuetLapse/DuetLapse3.py", line 467, in quit_gracefully
    terminate()
  File "/home/pi/DuetLapse/DuetLapse3.py", line 798, in terminate
    sys.exit(0)
SystemExit: 0

[stuartofmt]

Version 3.2.0 has been release.
This is a significant upgrade and other than bug fixes I expect it will be stable for a while.

I added a helper program startDuetLapse3 to enable remote start/stop of DuetLapse3 instances using a browser or similar (e.g. curl). This provides a lot of flexibility in that you can have the helper program set to run at boot time and then remotely start / stop DuetLapse3 instances when you need them without having to use additional scripts or SSH into the machine etc.

###Version 3.2.0###

[1] Adds the ability to work with startDuetLapse3. See the description here:
https://github.com/stuartofmt/DuetLapse3/blob/main/startDuetLapse3.md
In summary startDuetLapse3 provides the ability to remotely start / stop DuetLapse3.
[2] Changed the shutdown method to reduce low level 'noise' messages.
[3] Restructured to provide better efficiency. Typically less than 1% CPU when idle.
[4] Fixed a bug that was introduced in the prior version (not detecting layer changes)
[5] Made further improvements to the handling of pauses.
There are some edge cases where a printer can get stuck in a paused state.
The documentation has been updated. See especially -dontwait
[6]Added checks to prevent startup with ports that are already in use.

I have done a lot of testing but as usual - something may have slipped through the cracks .....

[stuartofmt]

@SIam said in DuetLapse3:

is it possible to catch those errors in python ?

Yes - it was one of the things that annoyed me too! one of those things that a 1000 google 'fixes' (all different) did not fix I found a way though
Its part of the 3.2.0 release.

Hope I got them all

[JohnOCFII]

@stuartofmt I'm looking forward to testing this and eliminating my auto-start setup. I find my older setup is re-starting multiple times a day, and only noticed it doing longer prints, when the timelapse was only for the last period of time. Kind of sad after a 10 hour print yielded a timelapse of the last 4 minutes...

[stuartofmt]

@JohnOCFII said in DuetLapse3:

..... Kind of sad after a 10 hour print yielded a timelapse of the last 4 minutes...

I hear ya! FWIW - I have "soak tested" this running overnight and into the next day with a small number of seconds (smaller than practical). 10K+ images and it was stable but I'm sure you can find something for me to fix

Note that it also runs on WIN10 (and maybe earlier ??) as well as WSL (which I like a lot). So if the Pi becomes a limitation there are other options.

Let me know how it works out.

[SIam]

hi,

thanks for your work!! Now i have a question for what is the whitelist ? i get this error:

Traceback (most recent call last):
  File "DuetLapse3.py", line 18, in <module>
    from DuetLapse3 import whitelist
  File "/home/pi/DuetLapse/DuetLapse3.py", line 18, in <module>
    from DuetLapse3 import whitelist
ImportError: cannot import name 'whitelist' from 'DuetLapse3' (/home/pi/DuetLapse/DuetLapse3.py)

the module is installed

pi@raspberrypi:~/DuetLapse $ sudo find / -name whitelist*
/home/pi/.local/lib/python3.7/site-packages/whitelist
/home/pi/.local/lib/python3.7/site-packages/whitelist-0.2.8.dist-info

[stuartofmt]

@SIam said in DuetLapse3:

hi,

thanks for your work!! Now i have a question for what is the whitelist ? i get this error:

The short answer is that startDuetLapse.py needs to be in the same directory as DuetLapse3.py AND DuetLapse3.py needs to be at least at V3.2.0 (i.e. the latest version) .

I have never seen this error - but then I satisfy the above :-).

I just tried to simulate it by putting startDuetLapse3.py in a different directory and get a related but slightly different error. So I suspect that you may have an older version of DuetLapse3.py ?

python3 ./DuetLapse3.py -h

Needs to have this line in its return (up near the top)
Create time lapse video for Duet3D based printer. V3.2.0

The longer answer is this: When DuetLapse3.py is started manually, the various input options are checked for validity (i.e. parsed through a whitelist).
To help prevent misuse and provide a measure of security startDuetLapse3.py invokes the very same code (imported from DuetLapse3.py) BEFORE it tries to start DuetLapse3.py (which then dutifully does the same thing again).

Why bother apparently doing it twice? To help prevent "someone" (not you, someone malicious) from accessing startDuetLapse3 via the http port and trying to execute some arbitrary code.
The original version (proof of concept) just parsed through any old command line. Dangerous indeed.
To feel comfortable - I needed startDuetLapse3 to be very specific to DuetLapse3. One of those defenses (minimal but likely 'good enough') was to use a whitelist. Since it did not make sense to try and maintain the whitelist it in two places - I restructured some of the code in DuetLapse3 3.2.0 to allow the whitelist to be imported. Hence the dependency on versions and location.

[SIam]

Sorry this was my fault my SD card was full after cleanup the SD card and Reinstallation the duet lapse is working.

[jnofsinger]

Hello,

Trying out 3.2.0 and running into the following issue (below). The print starts fine and captures a handful of images till the connection reset issue. Both the duet and the pi are running on the same wifi subnet, and the duet is the latest firmware version.

running with the following options (have more logs if needed)

/usr/bin/python3 /home/pi/Desktop/images/DuetLapse3.py -port 8181 -verbose -duet 172.16.37.118 -detect layer -camera1 stream -weburl1 http://127.0.0.1:8080/?action=stream

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
File "/usr/lib/python3.7/threading.py", line 917, in _bootstrap_inner
self.run()
File "/usr/lib/python3.7/threading.py", line 865, in run
self._target(*self._args, **self._kwargs)
File "/home/pi/Desktop/images/DuetLapse3.py", line 1068, in captureLoop
oneInterval('Camera1', camera1, weburl1, camparam1)
File "/home/pi/Desktop/images/DuetLapse3.py", line 612, in oneInterval
zn = getDuetLayer(apiModel)
File "/home/pi/Desktop/images/DuetLapse3.py", line 733, in getDuetLayer
r = requests.get(URL, timeout=5)
File "/usr/lib/python3/dist-packages/requests/api.py", line 75, in get
return request('get', url, params=params, **kwargs)
File "/usr/lib/python3/dist-packages/requests/api.py", line 60, in request
return session.request(method=method, url=url, **kwargs)
File "/usr/lib/python3/dist-packages/requests/sessions.py", line 533, in request
resp = self.send(prep, **send_kwargs)
File "/usr/lib/python3/dist-packages/requests/sessions.py", line 646, in send
r = adapter.send(request, **kwargs)
File "/usr/lib/python3/dist-packages/requests/adapters.py", line 498, in send
raise ConnectionError(err, request=request)
requests.exceptions.ConnectionError: ('Connection abort

[SIam]

@stuartofmt sorry but i have also a error for you

Exception in thread Thread-2:
Traceback (most recent call last):
  File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 600, in urlopen
    chunked=chunked)
  File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 384, in _make_request
    six.raise_from(e, None)
  File "<string>", line 3, in raise_from
  File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 380, in _make_request
    httplib_response = conn.getresponse()
  File "/usr/lib/python3.7/http/client.py", line 1336, in getresponse
    response.begin()
  File "/usr/lib/python3.7/http/client.py", line 306, in begin
    version, status, reason = self._read_status()
  File "/usr/lib/python3.7/http/client.py", line 267, in _read_status
    line = str(self.fp.readline(_MAXLINE + 1), "iso-8859-1")
  File "/usr/lib/python3.7/socket.py", line 589, in readinto
    return self._sock.recv_into(b)
ConnectionResetError: [Errno 104] Connection reset by peer

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/lib/python3/dist-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 638, in urlopen
    _stacktrace=sys.exc_info()[2])
  File "/usr/lib/python3/dist-packages/urllib3/util/retry.py", line 367, in increment
    raise six.reraise(type(error), error, _stacktrace)
  File "/usr/lib/python3/dist-packages/six.py", line 692, in reraise
    raise value.with_traceback(tb)
  File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 600, in urlopen
    chunked=chunked)
  File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 384, in _make_request
    six.raise_from(e, None)
  File "<string>", line 3, in raise_from
  File "/usr/lib/python3/dist-packages/urllib3/connectionpool.py", line 380, in _make_request
    httplib_response = conn.getresponse()
  File "/usr/lib/python3.7/http/client.py", line 1336, in getresponse
    response.begin()
  File "/usr/lib/python3.7/http/client.py", line 306, in begin
    version, status, reason = self._read_status()
  File "/usr/lib/python3.7/http/client.py", line 267, in _read_status
    line = str(self.fp.readline(_MAXLINE + 1), "iso-8859-1")
  File "/usr/lib/python3.7/socket.py", line 589, in readinto
    return self._sock.recv_into(b)
urllib3.exceptions.ProtocolError: ('Connection aborted.', ConnectionResetError(104, 'Connection reset by peer                                                                 '))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/lib/python3.7/threading.py", line 917, in _bootstrap_inner
    self.run()
  File "/usr/lib/python3.7/threading.py", line 865, in run
    self._target(*self._args, **self._kwargs)
  File "/home/pi/DuetLapse/DuetLapse3.py", line 1041, in captureLoop
    duetStatus=getDuetStatus(apiModel)
  File "/home/pi/DuetLapse/DuetLapse3.py", line 707, in getDuetStatus
    r = requests.get(URL, timeout=120)  #Long timeout to handle restart of Duet
  File "/usr/lib/python3/dist-packages/requests/api.py", line 75, in get
    return request('get', url, params=params, **kwargs)
  File "/usr/lib/python3/dist-packages/requests/api.py", line 60, in request
    return session.request(method=method, url=url, **kwargs)
  File "/usr/lib/python3/dist-packages/requests/sessions.py", line 533, in request
    resp = self.send(prep, **send_kwargs)
  File "/usr/lib/python3/dist-packages/requests/sessions.py", line 646, in send
    r = adapter.send(request, **kwargs)
  File "/usr/lib/python3/dist-packages/requests/adapters.py", line 498, in send
    raise ConnectionError(err, request=request)
requests.exceptions.ConnectionError: ('Connection aborted.', ConnectionResetError(104, 'Connection reset by p                                                                 eer'))

[stuartofmt]

@jnofsinger said in DuetLapse3:

File "/home/pi/Desktop/images/DuetLapse3.py", line 733, in getDuetLayer
r = requests.get(URL, timeout=5)

Your command is almost identical to one I used successfully yesterday - the only meaningful difference being -verbose.

The problem does not look like there was a timeout issue - if there was there should be a message in the logs like:

getDuetLayer failed to get data. Code: <some number> Reason: <some text>

SO that points to a communication issue between the pi and the Duet i.e. it looks like it could not even connect. The fact that it worked sometimes makes it hard to track down and suggests that the basic code is ok.

Let me thing about how to trap the connection issue and report it - although to be frank, I don't want to disappear down the rabbit hole of debugging Duet connections

In any case, in parallel, can you trawl through the WDC forum and see what discussions are taking place on connection issues. My sense is that you will need to address some aspect anyway , independently of anything I can do in the code.

I hope to have a patched version for you to try later today / tomorrow but as I said , I doubt it will fix anything - maybe just allow Duet to report the error or try a little harder.

[stuartofmt]

@SIam :

@jnofsinger

It looks like you are both experiencing the same issue. Are you both using SBC ?

Please try this version. I restructured the API calls and put in some exception handling for network connection issues and for timeouts. The messages will appear in the output. The code will try to re-establish a connection and continue on if it is successful.
It will eventually give up after a few minutes.
In any case it will give some clues as to what is happening.
I tested this in three ways (1) turning off the network on the machine running DuetLapse3 and (2) turning off my printer (3) repeatedly hitting emergency stop in DWC

This will show as version 3.2.1. Please report back.

[DuetLapse3.py]