Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    [3.4.0.b2] Issue with diagnostic (M122) information

    Scheduled Pinned Locked Moved
    Beta Firmware
    3
    4
    232
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • SIamundefined
      SIam
      last edited by

      Hello,

      I wanted show today the Diagnostic data from my Duet2wifi board, but this was first not successful as you can see on the following picture

      2021-08-08 21_14_00-hypercube.png

      To solve this issue, I have restarted the duet board with no success, then I closed the browser and started it again with no success too.
      Now I have opened a second Browser (the first browser was still open) here I entered the M122 command and there was no response in this Browser but in the first Browser i got the diagnostic data.
      So if I want a result from the M122 command, i have to open two browsers, the first instance is for the result and the second one is to enter the command.

      The following sw is installed:
      Duet Web Control 3.4.0-b2
      Board: Duet 2 WiFi (2WiFi)
      Firmware: RepRapFirmware for Duet 2 WiFi/Ethernet 3.4.0beta2 (2021-08-03)
      Duet WiFi Server Version: 1.26

      greetings
      Andy

      Hypercube-Evolution-Hybrid, Piezo Orion, Orbiter
      Duet WiFi 1.02 or later + DueX5
      RepRapFirmware for Duet 2 WiFi/Ethernet 3.4.0beta4 (2021-09-27 11:30:36)
      Duet WiFi Server: 1.26
      Duet Web Control 3.4.0beta4 (2021-09-27)

      sebkritikelundefined 1 Reply Last reply Reply Quote 0
      • sebkritikelundefined
        sebkritikel @SIam
        last edited by

        @siam Some other comments on this issue here: https://forum.duet3d.com/topic/24487/diagnostics-missing?_=1628456075700

        No real solution yet , aside from having separate sessions, like you mentioned.

        Large(ish?) IDEX - 6HC, 1HCL
        Stratasys Dimension 1200es to 6HC Conversion

        SIamundefined 1 Reply Last reply Reply Quote 1
        • Phaedruxundefined
          Phaedrux Moderator
          last edited by

          Thanks for beta testing! 😅

          Z-Bot CoreXY Build | Thingiverse Profile

          1 Reply Last reply Reply Quote 1
          • SIamundefined
            SIam @sebkritikel
            last edited by

            @sebkritikel said in [3.4.0.b2] Issue with diagnostic (M122) information:

            @siam Some other comments on this issue here: https://forum.duet3d.com/topic/24487/diagnostics-missing?_=1628456075700

            No real solution yet , aside from having separate sessions, like you mentioned.

            Thanks for pointing me to this thread ! I have overseen this 😱

            Hypercube-Evolution-Hybrid, Piezo Orion, Orbiter
            Duet WiFi 1.02 or later + DueX5
            RepRapFirmware for Duet 2 WiFi/Ethernet 3.4.0beta4 (2021-09-27 11:30:36)
            Duet WiFi Server: 1.26
            Duet Web Control 3.4.0beta4 (2021-09-27)

            1 Reply Last reply Reply Quote 0
            • First post
              Last post
            Unless otherwise noted, all forum content is licensed under CC-BY-SA