Duet Duex2 is it out of production?
-
Good morning, I was searching for the mentioned board because I'd need only 2 more drivers not 5 but it seems to be out of stock everywhere...isn't it produced anymore?
Thanks
Andrea -
@the_dragonlord yes we no longer make the Duex2 - demand was too low.
-
@t3p3tony said in Duet Duex2 is it out of production?:
@the_dragonlord yes we no longer make the Duex2 - demand was too low.
uh... ok, thanks
-
Duex5 is still available though.
-
@phaedrux said in Duet Duex2 is it out of production?:
Duex5 is still available though.
I know but it's too expensive and "too much" for my needs at now...just for asking, isn't there a very remote chanche that somewhere deep in your warehouses you still have a Duex2 left? Even a fully working prototipe....just for asking....
-
If you only need the drivers, maybe the external driver breakout board would suit?
https://duet3d.dozuki.com/Wiki/Duet_Expansion_Breakout_Board
-
@phaedrux said in Duet Duex2 is it out of production?:
If you only need the drivers, maybe the external driver breakout board would suit?
https://duet3d.dozuki.com/Wiki/Duet_Expansion_Breakout_Board
YES, EXCELLENT!!!! Is it available in some reseller? It doesn't look to mount the TMC2660....does it?
EDIT
I have read the documentation and I'd need two external drivers....too complicated...thanks...I'll give up my project so....I need a "single compact" board...maybe in future I'll buy a Duex5 but not now....thanks -
@the_dragonlord you could use the rrf on stm Project Boards. With the skr GTR or the E3 rrf with idex
-
@pcr said in Duet Duex2 is it out of production?:
@the_dragonlord you could use the rrf on stm Project Boards. With the skr GTR or the E3 rrf with idex
I apologize, I'm not an expert and I didn't understand what you meant...is it an alternative board?
