• Tags
  • Documentation
  • Order
  • Register
  • Login
Duet3D Logo Duet3D
  • Tags
  • Documentation
  • Order
  • Register
  • Login

Ps-on / PS-off Duet3 6HC

Scheduled Pinned Locked Moved
Duet Hardware and wiring
4
39
2.2k
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • undefined
    oozeBot @Heartleander81
    last edited by 29 Sept 2021, 12:43

    @heartleander81 Sorry to hear that - that model appears to work differently than many of the others. Where the two power supplies negative terminals tied together?

    undefined 3 Replies Last reply 29 Sept 2021, 12:47 Reply Quote 0
    • undefined
      Heartleander81 @oozeBot
      last edited by 29 Sept 2021, 12:47

      @oozebot I can already find a solution 🙂 I hope Meanwell answers promptly so that I can find out and possibly make a repair or get an exchange because it has a 3 year guarantee.

      1 Reply Last reply Reply Quote 0
      • undefined
        Heartleander81 @oozeBot
        last edited by 30 Sept 2021, 08:35

        @oozebot I doun't know why, but now is it work.

        I think it was a Bad connection on the power supply.

        1 Reply Last reply Reply Quote 0
        • undefined
          Heartleander81 @oozeBot
          last edited by Heartleander81 30 Sept 2021, 09:39

          @oozebot so there is no question now.

          1 Reply Last reply Reply Quote 0
          • undefined
            Heartleander81
            last edited by 30 Sept 2021, 10:23

            So now It runs. But when I switch from off to on I must reset the duet3 6hc to connect my tool board.

            undefined 1 Reply Last reply 30 Sept 2021, 11:37 Reply Quote 0
            • undefined
              dc42 administrators @Heartleander81
              last edited by 30 Sept 2021, 11:37

              @heartleander81 is should be sufficient to re-run config.g.

              Duet WiFi hardware designer and firmware engineer
              Please do not ask me for Duet support via PM or email, use the forum
              http://www.escher3d.com, https://miscsolutions.wordpress.com

              undefined 1 Reply Last reply 30 Sept 2021, 11:46 Reply Quote 0
              • undefined
                Heartleander81 @dc42
                last edited by 30 Sept 2021, 11:46

                @dc42
                An M999 is also possible.
                Only when I want to pack this into a Gcode print file does it skip the M999 command because a print has started.
                I thought that after printing with M81 S1 I would switch off the power supply and switch on the power supply with a new M80 print job, but because the M999 command in the start code does not work, this is currently not possible.
                It is no problem to switch to on by hand and then run an M999.

                The method with the start code would be luxury if possible

                undefined 1 Reply Last reply 30 Sept 2021, 12:48 Reply Quote 0
                • undefined
                  oozeBot @Heartleander81
                  last edited by oozeBot 30 Sept 2021, 12:48

                  @heartleander81 Here is a snippet from our power toggle macro that might assist:

                  if boards[0].vIn.current > 22
                  M291 R"Turn on power?" P"Are you sure you want to turn on power?" S3
                  M999 A1 ; Soft-reset PanelDue
                  M999 ; Soft-reset Mainboard
                  else
                  M291 R"Turn off power?" P"Are you sure you want to turn off power?" S3
                  M0 ; Unconditional stop
                  M81 S1 ; Power off 24v power supply
                  G4 S1 ; Pause for one second
                  M999 A1 ; Soft-reset PanelDue

                  ** edit ** the M80 is in our config.g

                  M80 C"!pson"
                  M80
                  undefined 1 Reply Last reply 30 Sept 2021, 12:59 Reply Quote 0
                  • undefined
                    Heartleander81 @oozeBot
                    last edited by Heartleander81 30 Sept 2021, 12:59

                    @oozebot yes M80 C"!pson" have I in my config. Must M80 in the config.g?
                    When I turn the Main switch on then is all ok. All start and the tool board is there.
                    But when I switch with Software off and then on there is no thermistor there. After M999 is all good.

                    How make I this with the macro?

                    I've never worked with macros so I don't know how to do it.

                    [ Edit ]

                    I have copy your macro.
                    I must changes > TO < then work power of but power not.
                    With M80 in the macro goes the PSU on but the M999 will not be performed.

                    Without M80 and M80 in the Firmware do the macro nothing from off to on.

                    1 Reply Last reply Reply Quote 0
                    • undefined
                      Heartleander81
                      last edited by 30 Sept 2021, 14:10

                      if boards[0].vIn.current < 22
                      M291 R"Turn on power" P":-)" S1 T5
                      M80
                      G4 S1
                      M999 ; Soft-reset Mainboard
                      ;M999 A1 ; Soft-reset PanelDue
                      else
                      M291 R"Turn off power" P" Zzzz" S1 T5
                      M81 S1 ; Power off 24v power supply
                      ;G4 S1 ; Pause for one second
                      ;M999 A1 ; Soft-reset PanelDue

                      That is what I use. I doun't have a PanelDue to time but is the next what I buy

                      undefined 1 Reply Last reply 30 Sept 2021, 14:40 Reply Quote 0
                      • undefined
                        oozeBot @Heartleander81
                        last edited by 30 Sept 2021, 14:40

                        @heartleander81 Awesome! Glad you got it working..

                        1 Reply Last reply Reply Quote 0
                        • undefined
                          Heartleander81
                          last edited by 30 Sept 2021, 15:51

                          @oozebot not completed. At power on doun't come M999 AMD the board stand at working

                          undefined 1 Reply Last reply 30 Sept 2021, 15:52 Reply Quote 0
                          • undefined
                            oozeBot @Heartleander81
                            last edited by 30 Sept 2021, 15:52

                            @heartleander81 that's why the M80 is in our config.g..

                            undefined 1 Reply Last reply 30 Sept 2021, 15:56 Reply Quote 0
                            • undefined
                              Heartleander81 @oozeBot
                              last edited by 30 Sept 2021, 15:56

                              @oozebot to time I doun't have M80 in the config.g.
                              M999 is not executed because the board is busy. The next step would be M999 but it will not be executed

                              1 Reply Last reply Reply Quote 0
                              • undefined
                                Heartleander81
                                last edited by 30 Sept 2021, 18:35

                                I think that an M999 cannot be executed by a macro. I commented out all M999 and the macro is running. I added an G4 S5 and then M98 P "config.g" after the M80, which works. I only get 2 error messages that read as follows.

                                Warning: Board 20 does not have input handle 3000
                                Warning: Board 20 does not have input handle 1000

                                what are the warnings and how can you turn them off?

                                if boards[0].vIn.current < 22
                                M291 R"Turn on power" P":-)" S1 T5
                                M80
                                G4 S4
                                M98 P"config.g"
                                else
                                M291 R"Turn off power" P" Zzzz" S1 T5
                                M81 S1 ; Power off 24v power supply
                                undefined 1 Reply Last reply 30 Sept 2021, 19:13 Reply Quote 0
                                • undefined
                                  oozeBot @Heartleander81
                                  last edited by 30 Sept 2021, 19:13

                                  @heartleander81 I just tested with a single line macro that only contains "M999" and it is properly restarting. This is on 3.4b4 but I'm certain it works on 3.3 as well.

                                  undefined 1 Reply Last reply 30 Sept 2021, 19:16 Reply Quote 0
                                  • undefined
                                    Heartleander81 @oozeBot
                                    last edited by 30 Sept 2021, 19:16

                                    @oozebot i use RFF 3.4b4. Can you test the complet macro without M98 but with M999?

                                    undefined 1 Reply Last reply 30 Sept 2021, 19:21 Reply Quote 0
                                    • undefined
                                      oozeBot @Heartleander81
                                      last edited by 30 Sept 2021, 19:21

                                      @heartleander81 said in Ps-on / PS-off Duet3 6HC:

                                      @oozebot i use RFF 3.4b4. Can you test the complet macro without M98 but with M999?

                                      I do believe the status becomes busy when M98 is run. I can try to test this soon, but just started a job on the printer I was testing with.

                                      undefined 1 Reply Last reply 30 Sept 2021, 19:27 Reply Quote 0
                                      • undefined
                                        Heartleander81
                                        last edited by 30 Sept 2021, 19:23

                                        I have create a single line macro with M999 in it and at my System doun't work it.

                                        DWC say Work and Do nothing. After write in console M999 is all normal

                                        1 Reply Last reply Reply Quote 0
                                        • undefined
                                          Heartleander81 @oozeBot
                                          last edited by Heartleander81 30 Sept 2021, 19:27

                                          @oozebot OK. On my system, a Macro with M999 comes busy. With M98 P "config.g" it runs except for 2 warnings regarding the toolboard

                                          Sorry in the last Post i doun't mean status work, I mean status busy. Sorry my english is not the best

                                          XD

                                          undefined 1 Reply Last reply 30 Sept 2021, 19:39 Reply Quote 0
                                          26 out of 39
                                          • First post
                                            26/39
                                            Last post
                                          Unless otherwise noted, all forum content is licensed under CC-BY-SA